15 Initial use
devolo dLAN 1000 duo+
3.4 Removing a dLAN 1000 duo+
from the network
To remove a dLAN 1000 duo+ adapter from an exist-
ing network, press the encryption button on the corre-
sponding adapter for at least 10 seconds. The
adapter will automatically be assigned a new randomly
generated password and will thus no longer be able to
access the network. To integrate the device into a dif-
ferent network after this, follow the steps described in
Chapter 3.3 Connecting the dLAN 1000 duo+, de-
pending on whether you are setting up a new network
or adding the device to an existing one.
To Next Page
Loading...
