Annex 24
devolo dLAN 1000 duo+
5 Annex
5.1 Technical data
5.2 Bandwidth optimisation
To significantly improve the transmission capacity of
the network, we recommend that you comply with the
following "connection rules":
쎲 Plug the dLAN 1000 duo+ directly into a wall
socket. Avoid using power strips. This may impair
the transmission of the dLAN signals.
쎲 If there are several sockets in the wall directly next
to each other, they behave like a power strip. Indi-
vidual sockets are optimal.
Security
128 Bit AES
Max. power output to
integrated socket
Plug-Type E: 16 A / 3500 W
Plug-Type F: 16 A / 3600 W
Plug-Type G: 13 A / 3000 W
Plug-Type J: 10 A / 2300 W
Device port 2x Ethernet RJ45
Power consumptionMaximum: 4,0 W
Typical: 3,3 W
Stand-by: 0,9 W
Power supply internal
196-250 V AC
50 Hz
Attenuation filter 2 – 68 MHz
Filter characteristics -22 db to -45 db
Temperature (Storage/
Operating
-25°C to 70 °C / 0°C to 40°C
Dimensions (in mm, with-
out plug)
130x65x40 (HxWxD)
Ambient conditions 10-90% Humidity, non-con-
densing
Certifications CE Class B (EU, CH, NO)
To Next Page
Loading...
