Devolo dLAN 500 AVpro UNI - 4.2 Building networking

Initial use 15
devolo dLAN 500 AVpro UNI
ling, connect the coax cable to the simultaneously
operated TV/SAT coax network.
 The 9-pin SUB-D Power satellite outlet for the
devolo mains adapter and data transmission by
means of PLC.
Connect the dLAN 500 AVpro UNI to the mains
adapter provided here.
When using coax lines for the dLAN, di-
stances of up to 600 m (1968.5 ft) can
be bridged.
When using power lines ('PowerLine')
for the dLAN, distances of up to 200 m
(656.2 ft) can be bridged.
Always use the included mains
adapter for supplying power to
the dLAN 500 AVpro UNI. It not
only provides the device with a
supply voltage of 48 V DC, but
also secures the transmission of
the modulated data to and from
the power line!
You may connect the mains ad-
apter to the dLAN 500 AVpro UNI
only!
You may connect only the corre-
sponding mains adapter to the
Sub-D jack of the dLAN 500 AV-
pro UNI!
The network cable for the dLAN
500 AVpro UNI cannot be exten-
ded using a "serial cable"!