24 All about the network
devolo dLAN 500 AVpro UNI
4.3 PoE operation
The ETH4 port on the dLAN 500 AVpro UNI can provide
a power supply in accordance with IEEE 802.3 af class
'0' for a device connected to this. To do so, the PoE
function of this port has to be enabled.
By default, the PoE function of the dLAN 500 AVpro
UNI is enabled. If it is disabled and needs to be ena-
bled, proceed as follows:
a Call up expert mode in dLAN AVpro manager
b Then in the AV network window, select the net-
work of the respective dLAN 500 AVpro UNI.
c In the dLAN network view, click the device in
question with the right mouse button to open the
context menu of the device.
d Here, enable the PoE function of the ETH4 port by
clicking the Enable PoE menu item.
If the PoE function of the ETH4 is disa-
bled, this switches off any device con-
nected to it. If the device in question is
part of the network, disabling the PoE
function can have effects on the accessi-
bility, for example, of terminal devices.
e Disable the PoE function of the ETH4 port by click-
ing the Disable PoE menu item.
To Next Page
Loading...
