33 Configuration
devolo Magic 2 LAN triple
Manually initiate a firmware update
1 In order to manually update the firmware,
visit the devolo website (www.devolo.com
).
1 Download the appropriate file for the
devolo Magic 2 LAN triple to your computer.
2 Next, click on Browse for firmware file… and
select the downloaded firmware file.
3 Confirm your settings by clicking the diskette
icon. After a successful update, the
devolo Magic 2 LAN triple restarts automati-
cally.
Ensure that the update procedure is not
interrupted.
4.2.5Reboot
Here, restart the devolo Magic adapter and/or re-
store it to the factory default settings.
Reboot
To restart a devolo Magic adapter, click Reboot.
Factory Settings
1 To remove a devolo Magic adapter from your
devolo Magic network and successfully restore
its entire configuration to the factory default
settings, click Factory reset.
2 Wait until the LED flashes white and then dis-
connect the devolo Magic adapter from the
mains supply.
Keep in mind that all settings that have already
been made will be lost!
To Next Page
Loading...
Need help?
General