● If you know the exact IP address of your adapter, you may also enter
it directly in the address line of a web browser such as Microsoft
Internet Explorer or Firefox (e.g. 192.168.0.17).
By default, the configuration interface will open directly. If a log-in password
was set under Overview
Edit Configuration
Security
,
you will be
prompted for it before the configuration interface will open.
Three central sections will be displayed when the configuration interface
opens:
● WLAN Status provides general information about your wireless network
and other stations connected to your Wireless extender where available.
● Change Configuration lets you adjust a variety of your adapter's
settings.
● The Management section lets you back up, restore and reset your user-
specific configuration. You can also update the firmware of your dLAN
®
Wireless extender here.
To Next Page
Loading...
