Before beginning with this step, make a note of the security codes of all
existing dLAN
®
adapters. This unique identifier of each dLAN
®
device is
located on the label on the underside of the housing. The code consists of 4
x 4 letters separated by dashes (e.g. ANJR-KMOR-KSHT-QRUV). Ensure that
all dLAN
®
adapters are connected to the power grid and computers or other
network components as appropriate.
4.2.1 Step 1: Search for dLAN adapter
After launching the Wizard, it initially scans for a dLAN
®
adapter connected
directly to your computer.
If it does not find a suitable device, use devolo Informer (see section 3.1) to
check whether it can be recognized correctly.
4.2.2 Step 2: Enter a network password
In this step, select a network password that will apply to all adapters in your
home network. The password must be used by all dLAN
®
devices.
To Next Page
Loading...
