Do not forget to click Save after entering the MAC addresses. An error
message will be returned if any of the values entered are invalid (e.g.
because the colons are missing).
Please remember to enter the MAC address of your own computer as well if
you are connected to the Wireless extender via WLAN rather than the
Ethernet port. Otherwise, you will lock yourself out of the device by activating
the WLAN filter!
3.4.6 dLAN Settings
In a dLAN
®
network, all connected components must use the same
password. The dLAN
®
password is normally defined once during the
installation of your Wireless extender with the aid of the dLAN
To Next Page
Loading...
