Need help?Do you have a question about the DeWalt 7740 and is the answer not in the manual?
Step-by-step guide for assembling and setting up the radial arm saw.
Detailed information on safe electrical connections and grounding for the tool.
Comprehensive list of safety precautions for operating stationary power tools.
Guidance on tool maintenance, lower guard use, and motor overload reset.
Identification and explanation of the various controls on the radial arm saw.
Procedure for adjusting the yoke clamp handle for proper operation.
Steps to adjust the bevel clamp to secure the motor at desired angles.
How to adjust rollerhead bearings for smooth arm movement and accuracy.
Procedures for aligning the table top parallel with the arm tracks.
Steps to adjust the blade to be perpendicular to the work top.
Adjusting bevel scale pointer and miter pointer for accuracy.
Aligning cross-cut travel parallel to the arm tracks for square cuts.
Essential warnings and guidelines for safe operation of the saw.
Instructions and guidance for miter, bevel, rip, cross, and other cut types.
A table listing common cutting problems, causes, and solutions.
Guide to diagnose motor issues, overload protection, and wiring details.
Information on model numbers, voltages, and assembly diagrams.
Lists various saw blades, legs, and other optional accessories.
Details on shaper/jointer fence, router attachment, plane/sand, and dado sets.
To Next Page
General
