Need help?Do you have a question about the DeWalt 7749 and is the answer not in the manual?
Details the technical specifications for the 7739 and 7749 Radial Arm Saw models.
Important safety notes and warnings regarding tool operation and maintenance.
Details on the manual-reset overload protector and how to reset the motor.
Overview of various attachments like shaper, router, dado, and sander for extended saw versatility.
How to adjust yoke clamp and bevel clamp handles for proper function and stability.
Guide for adjusting rollerhead bearings and the arm clamp for accurate operation.
Adjustments for miter clamp, belt tension, and base-to-column connection for precision.
Guides for performing various cutting and sanding operations on the radial arm saw.
Instructions for aligning the table top parallel to the arm and checking the guide fence.
Adjusting bevel scale, miter pointer, and cross-cut travel for accurate cutting.
Detailed steps for adjusting cross-cut travel and the rip scale pointer for precision.
Step-by-step guide to cutting kerf marks into the table top for easier positioning.
Critical safety information regarding kickback prevention and the proper use of pusher boards.
Instructions on shimming saw legs and essential warnings about kickbacks during operation.
Detailed instructions and diagrams for performing various types of cuts on the radial arm saw.
Operating guidelines for the anti-kickback spreader during ripping operations.
Detailed guidance on using the saw for shaping, dado cuts, and disc sanding.
Procedure to ensure the saw blade is perpendicular to the work top for accurate cuts.
Diagnosing and fixing issues with square cross cuts and miter cut accuracy.
Solutions for lumber walking, saw stalling, and poor cut finish quality.
Solutions for lumber traverse issues and miter scale accuracy problems.
Troubleshooting for elevating handle slippage and inconsistent clamp force at angles.
Information on available leg stands and optional accessories like the roller head stop.
Details on the saw dust catcher and accompanying literature for the radial arm saw.
Illustrations of various radial saw accessories such as shaper, dado, disc sander, and saber saw.
Labeling of the main controls and parts of the radial arm machine.
Explanation of the motor's overload protector and the steps for resetting it.
A chart identifying motor problems, their probable causes, and solutions.
To Next Page
General
