ENGLISH
4
ENGLISH
4
HEAVY-DUTY ROTARY HAMMERDRILL
D25032, D25033, D25132, D25133, D25134,
D25143, D25144
Congratulations!
You have chosen a DeWALT tool. Years of experience, thorough product development and innovation make
DeWALT one of the most reliable partners for professional power tool users.
Technical Data
D25032 D25033 D25132 D25133 D25134 D25143 D25144
Voltage V 220-240 220-240 220-240 220-240 220-240 220-240 220-240
Power input W 710 710 800 800 800 900 900
No-load speed min
–1
0–1550 0–1550 0–1500 0–1500 0–1500 0–1450 0–1450
No-load beats per min bpm 0–5680 0–5680 0–5500 0–5500 0–5540 0–5350 0–5350
Single Impact energy (NON EPTA) J 2.1 2.1 2.9 2.9 3.0 3.2 3.2
Maximum drilling range in
steel/wood/concrete mm 13/30/22 13/30/22 13/30/26 13/30/26 13/30/26 13/30/28 13/30/28
Chisel positions -- 44 -- 44 48 48 48
Core drilling capacity in soft brick mm 50 50 50 50 65 65 65
Tool holder SDS Plus SDS Plus
SDS Plus SDS Plus SDS Plus SDS Plus SDS Plus
Collar diameter mm 43 43 43 43 54 54 54
Weight kg 2.5 2.5 2.6 2.6 3.0 3.1 3.1
Definitions: Safety Guidelines
The definitions below describe the level of severity
for each signal word. Please read the manual and
pay attention to these symbols.
DANGER: Indicates an imminently
hazardous situation which, if not avoided,
will result in death or serious injury.
WARNING: Indicates a potentially
hazardous situation which, if not
avoided, could result in death or
serious injury.
CAUTION: Indicates a potentially
hazardous situation which, if not
avoided, may result in minor or
moderate injury.
NOTICE: Indicates a practice not
related to personal injury which, if
not avoided, may result in property
damage.
Denotes risk of electric shock.
Denotes risk of fire.
WARNING: To reduce the risk of injury,
read the instruction manual.
General Power Tool Safety Warnings
WARNING! Read all safety warnings
and instructions Failure to follow the
warnings and instructions may result in
electric shock, fire and/or serious injury.
SAVE ALL WARNINGS AND INSTRUCTIONS
FOR FUTURE REFERENCE
The term “power tool” in the warnings refers
to your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
1) WORK AREA SAFETY
a) Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
b) Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power
tools create sparks which may ignite the dust
or fumes.
c) Keep children and bystanders away while
operating a power tool. Distractions can
cause you to lose control.
2) ELECTRICAL SAFETY
a) Power tool plugs must match the outlet.
Never modify the plug in any way. Do
not use any adapter plugs with earthed
(grounded) power tools. Unmodified plugs
To Next Page
Loading...
