DeWalt D25334 Instruction Manual

ENGLISH
18
English (original instructions)
Definitions: Safety Alert Symbols and Words
This instruction manual uses the following safety alert symbols and words to alert you to hazardous situations and your risk
of personal injury or propertydamage.

DANGER: Indicates an imminently hazardous situation which, if not avoided, will result in death or seriousinjury.

WARNING: Indicates a potentially hazardous situation which, if not avoided, could result in death or seriousinjury.

CAUTION: Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderateinjury.

(Used without word) Indicates a safety relatedmessage.
NOTICE: Indicates a practice not related to personal injury which, if not avoided, may result in propertydamage.

WARNING! Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
seriousinjury.

WARNING: To reduce the risk of injury, read the
instructionmanual.
1
Trigger switch
2
Forward/reverse button
3
Mode selector dial
4
Mode selector button
5
Side handle
6
Main handle
7
SDSPlus tool holder
8
Sleeve
9
Depth rod
10
Depth rod release button
Fig. A
1
3
4
5
6
7 8
9
10
2

DeWalt D25334 Specifications

General

Input power	950 W
Power source	AC
Impact rate	5200 bpm
Idle speed (max)	1150 RPM
Sound power level	104 dB
Impact energy (max)	3.5 J
Sound pressure level	93 dB
Vibration level (chiseling)	7.8 m/s²
Drilling diameter in wood (max)	13 mm
Vibration level (metal drilling)	2.5 m/s²
Vibration level (hammer drilling)	6.9 m/s²
Drilling diameter in concrete (max)	30 mm
Vibration level uncertainty (chiseling)	1.5 m/s²
Chiseling	Yes
Chuck type	SDS Plus
Product color	Black, Yellow

Weight and Dimensions

Depth	375 mm
Width	95 mm
Height	250 mm
Weight	3900 g