Need help?Do you have a question about the DeWalt D25481 and is the answer not in the manual?
General| Power Source | Corded Electric |
|---|---|
| Impact Energy | 4.2 J |
| No Load Speed | 0 - 820 rpm |
| Blows Per Minute | 0 - 4700 bpm |
| Chuck Type | SDS-Plus |
| Tool Holder | SDS-Plus |
| Weight | 4.9 kg |
| Max. Drilling Capacity [Core bit] | 65 mm |
| Drilling Capacity (Steel) | 13 mm |
| Impact Rate | 0 - 4, 500 BPM |
| Max. Drilling Capacity [Concrete] | 26 mm |
| Drilling Capacity (Concrete) | 26 mm |
Details voltage, frequency, power input, speed, impact energy, and drilling ranges.
Presents sound pressure, sound power, and vibration emission values for different applications.
Lists directives and standards the product complies with, including Machinery Directive.
Guidelines for maintaining a safe and illuminated workspace and keeping bystanders away.
Precautions regarding plugs, cords, and protection against electric shock.
Advice on staying alert, using PPE, and preventing unintentional starting.
Proper usage, maintenance, and storage of power tools to prevent accidents.
Advice on using auxiliary handles, proper grip, and avoiding prolonged use.
Requirements for ear protection, eye protection, and gloves during operation.
Lists potential risks like hearing impairment, burns from hot parts, and flying particles.
Information on double insulation and U.K. plug replacement procedures.
Recommendations for using extension cords, including conductor size and length.
Lists items included in the product package.
Explains pictograms and their meanings shown on the tool itself.
Identifies key parts of the rotary hammer using numbered references.
Specifies the professional applications for the rotary hammer.
Describes how active vibration control works and its benefits.
Instructions for mounting and positioning the side handle for optimal control.
Warnings about hot parts, proper bit tightening, and using sharp bits.
Step-by-step guide for fitting and removing SDS bits from the tool.
Emphasizes following safety instructions and disconnecting before adjustments.
Illustrates and explains the correct way to hold the tool for safety.
Explains the function of overload and mechanical clutches during operation.
Details the different operating modes and how to select them.
Steps for choosing accessories, selecting modes, and starting operation.
Advice on applying pressure, maintaining a straight line, and drilling rates.
Guidance on dry diamond drilling and the use of core bits.
Instructions for cleaning the tool using air and mild soap.
Warnings about using non-DEWALT accessories and recommendations.
Information on proper disposal of products and batteries for recycling.
Lists contact details for DEWALT service and support in various countries.
To Next Page
