DeWalt D25614 User Manual

ENGLISH
3
EC-Declaration of Conformity
Machinery Directive
Heavy-Duty Rotary Hammerdrill
D25614
DeWALT declares that these products described under Technical
Data are in compliance with:
2006/42/EC, EN62841-1:2015+AC:2015 +A11:2022, EN62841-2-
6:2020 +A11:2020.
These products also comply with Directive 2014/30/EU and
2011/65/EU. For more information, please contact DeWALT at
the following address or refer to the back of themanual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf ofDeWALT.
Markus Rompel
Vice-President Engineering, PTE-Europe
DeWALT, Richard-Klinger-Straße 11,
65510, Idstein, Germany
30.12.2022
DECLARATION OF CONFORMITY
THE SUPPLY OF MACHINERY SAFETY
REGULATIONS 2008
Heavy-Duty Rotary Hammerdrill
D25614
DeWALT declares that these products described under “technical
data” are in compliancewith:
The Supply of Machinery (Safety) Regulations, 2008, S.I.
2008/1597 (as amended),
EN62841-1:2015+AC:2015 +A11:2022, EN62841-2-6:2020
+A11:2020.
These products also conform to the following UK Regulations:
Electromagnetic Compatibility Regulations, 2016, S.I.2016/1091
(as amended).
The Restriction of the Use of Certain Hazardous Substances
in Electrical and Electronic Equipment Regulations 2012, S.I.
2012/3032 (as amended).
English (original instructions)
Congratulations!
You have chosen a DeWALT tool. Years of experience, thorough
product development and innovation make DeWALT one of the
most reliable partners for professional power toolusers.
Technical Data
HEAVYDUTY ROTARY HAMMERDRILL
D25614
D25614
Voltage V
AC
230
(U.K. & Ireland only) V
AC
230/115
Type 1
No-load speed min
-1
190–380
No-load beats per minute bpm 1450–2900
Power input W 1350
Single impact energy (EPTA 05/2009) J 10.5
Optimum drilling range into concrete
mm
16–32
Maximum drilling range in concrete
mm
45
Maximum core drilling range in concrete
mm
125
Tool holdler SDSMAX
Weight kg 7.8
Noise values and/or vibration values (triax vector sum) according to
EN62841-2-6:
L
PA
(emission sound pressure level) dB(A) 98
L
WA
(sound power level) dB(A) 106
K (uncertainty for the given sound level) dB(A) 3
Drilling
Vibration emission value a
h, HD
= m/s² 10.7*
Uncertainty K = m/s² 1.5
Chiselling
Vibration emission value a
h
, Cheq
= m/s² 9.2*
Uncertainty K = m/s² 1.5
* Measured at the side handle. Side handle vibration is higher than vibration at
the mainhandle.
The vibration and/or noise emission level given in this information
sheet has been measured in accordance with a standardised test
given in EN IEC 62841 and may be used to compare one tool with
another. It may be used for a preliminary assessment ofexposure.

WARNING: The declared vibration and/or noise emission
level represents the main applications of the tool. However,
if the tool is used for different applications, with different
accessories or is poorly maintained, the vibration and/or
noise emission may differ. This may significantly increase the
exposure level over the total workingperiod.
An estimation of the level of exposure to vibration and/or
noise should also take into account the times when the tool is
switched off or when it is running but not actually doing the
job. This may significantly reduce the exposure level over the
total workingperiod.
Identify additional safety measures to protect the operator
from the effects of vibration and/or noise such as: maintain
the tool and the accessories, keep the hands warm (relevant
for vibration), organisation of workpatterns.

DeWalt D25614 Specifications

General

Brand	DeWalt
Model	D25614
Category	Rotary Hammer
Language	English