DeWalt D27112 - User Manual

D27111
D27112
www.
.eu

DeWalt D27112 Specifications

General

Input power	- W
Power source	AC
Blade bore	30 mm
Blade diameter	305 mm
Saw blade included	Yes
Idle speed (max)	3650 RPM
Sound power level	109 dB
Miter setting (left)	50 °
Sound pressure level	97 dB
Miter setting (right)	60 °
Cutting depth (max)	51 mm

Weight and Dimensions

Depth	580 mm
Width	980 mm
Height	710 mm
Weight	23000 g

Summary

TABLE TOP MITRE SAW D27111;D27112

Technical Data

Definitions: Safety Guidelines

Safety Instructions

General Safety Rules

General rules for safe operation and work area management.

Additional Safety Rules for Table Top Mitre Saws

Specific safety rules tailored for the operation of table top mitre saws.

Mitre Saw Mode

Residual risks

Markings on Tool

INTENDED USE

Electrical Safety

ASSEMBLY

Mounting the saw blade (fig. D & F1 - F5)

Detailed steps for safely installing or replacing the saw blade.

Adjustment

Mitre Saw Mode Adjustments

Saw Bench Mode Adjustments

Adjusting the riving knife (fig. M1 & M2)

Ensures correct alignment of the riving knife with the saw blade for safety.

Mounting and adjusting the parallel fence (fig. N1 - N4)

Attaches and aligns the parallel fence for precise ripping operations.

Changing from saw bench to mitre saw mode (fig. A1 & A2)

Prior to Operation

OPERATION

Instructions for Use

General safety guidelines and operational recommendations for using the tool.

General Sawing Procedures

Bevel cuts (fig. A1, K1 & S)

Compound mitre

Sawing in the bench mode

Ripping (fig. T)

MAINTENANCE

Cleaning

Cleaning and maintaining the kerf plate (fig. U)