To Next PageTo Next Page
Need help?Do you have a question about the DeWalt D24000 and is the answer not in the manual?
General| Input power | 1600 W |
|---|---|
| Power source | AC |
| Blade bore | 25.4 mm |
| Blade diameter | 250 mm |
| Idle speed (max) | 4200 RPM |
| Sound pressure level | 103 dB |
Weight and Dimensions| Depth | 860 mm |
|---|---|
| Width | 690 mm |
| Weight | 32000 g |
Proper grounding procedures to prevent electric shock and ensure tool safety.
Guidance on selecting and using appropriate extension cords for safe operation.
Recommendations for protective clothing and footwear to prevent injury.
Specific safety rules and guidelines for operating the wet tile saw.
Information on warning labels and adherence to safety protocols.
Detailed instructions for attaching the cutting wheel to the saw.
Procedures for correctly mounting the cutting cart onto the saw's rails.
Guidance on setting the correct cutting wheel depth for safe operation.
Step-by-step instructions for installing the cutting wheel.
Instructions for attaching and securing the edge guide component.
Guidelines for positioning the saw and information about its motor.
Instructions for operating the power switch and adjusting water nozzles.
Procedures for aligning the cutting wheel and setting its depth.
Step-by-step instructions for performing cuts with the wet tile saw.
Explanation and use of the cut indicator for precise cutting.
Instructions for performing straight and diagonal cuts on tiles.
Procedures for making L-shaped and plunge cuts.
Guidance for making miter cuts at 22.5 and 45 degrees.
Adjusting the cutting cart scale and ensuring wheel squareness to the cart.
Setting the cutting wheel at 45 degrees and ensuring parallelism.
Adjusting the rails for smooth movement and the bevel pointer.
Adjusting the cutting wheel depth and the cut indicator.
Inspection and maintenance procedures for the tool's carbon brushes.
Guidelines for safely transporting, storing, and cleaning the tool.
Information on lubrication and recommended repair procedures.
Lists available accessories such as stands and cutting wheels.
Details on limited warranty, free service, and money-back guarantee.
Troubleshooting steps for when the saw will not start.
Solutions for issues causing unsatisfactory cuts.
Addresses problems with cutting wheel speed and excessive vibration.
Troubleshooting steps for inaccurate cuts and alignment problems.
