DeWalt D27111 User Manual

D27111
D27112
www.
.eu

DeWalt D27111 Specifications

General

Input power	- W
Power source	AC
Blade bore	30 mm
Blade diameter	305 mm
Saw blade included	Yes
Idle speed (max)	3000 RPM
Sound power level	107 dB
Miter setting (left)	50 °
Sound pressure level	94.5 dB
Miter setting (right)	60 °
Cutting depth (max)	51 mm

Weight and Dimensions

Depth	580 mm
Width	800 mm
Height	710 mm
Weight	26500 g

Summary

Technical Data

Cutting capacities

Details on the cutting dimensions for the mitre saw and saw bench modes.

Saw bench mode

Specifications related to the saw bench operational mode.

Definitions: Safety Guidelines

EC-Declaration of Conformity

Safety Instructions

General Safety Rules

Fundamental safety precautions for operating power tools.

Additional Safety Rules for Table Top Mitre Saws

Specific safety guidelines for table top mitre saw operation.

Mitre Saw Mode

Safety considerations specific to operating in mitre saw mode.

Residual risks

Markings on Tool

DATE CODE POSITION (FIG. A2)

Location and explanation of the date code on the tool.

Package Contents

INTENDED USE

Electrical Safety

Mains Plug Replacement (U.K. & Ireland Only)

Instructions for replacing the mains plug in the UK and Ireland.

Fitting a mains plug to 115 V units (U.K. and Ireland only).

Guidance on fitting a mains plug for 115V units in the UK/Ireland.

Using an Extension Cable

Recommendations for using extension cables with the tool.

ASSEMBLY

Unpacking (fig. B)

Steps for carefully removing the saw from its packaging.

Bench mounting (fig. C)

Instructions for securely mounting the saw to a workbench.

Storing the fastener tools (fig. D)

Guidance on storing the provided tools.

Mounting the upper blade guard (fig. E)

Procedure for attaching the upper blade guard.

Mounting the saw blade (fig. D & F1 - F5)

Detailed steps for installing or replacing the saw blade.

Adjustment

Adjusting the saw blade (fig. F5)

How to correct saw blade wobble.

Adjustments for mitre saw mode

Procedures for adjusting the mitre saw settings.

Checking and adjusting the blade to the fence (fig. G1 - G4)

Ensuring the blade is perpendicular to the fence.

Adjusting the mitre pointer (fig. G1, G2 & H)

Calibrating the mitre angle indicator.

Mitre lock/detent rod adjustment (fig. I)

Adjusting the mechanism for locking the mitre angle.

Checking and adjusting the blade to the table (fig. J1 - J4)

Ensuring the blade is perpendicular to the table.

Adjusting the fence (fig. K1 & K2)

Adjusting the fence for clearance and support.

Cutting small pieces (fig. K1 & K2)

Techniques for safely cutting small workpieces.

Vertical mitre cross-cut (fig. A1 & R)

Procedure for performing vertical mitre cross-cuts.

MAINTENANCE

Cleaning

Instructions for cleaning the tool and its components.

Cleaning and maintaining the kerf plate (fig. U)

Specific steps for cleaning and maintaining the kerf plate.

Lubrication

Information regarding the lubrication requirements of the machine.

OPERATION

Instructions for Use

General guidelines for operating the power tool.

Basic saw cuts

Information on performing fundamental types of saw cuts.

Quality of cut

Factors influencing the smoothness and quality of cuts.

Dust extraction (fig. A5)

Connecting and using the dust extraction system.

Sawing in mitre saw mode

Specific instructions for sawing in mitre mode.

General handling

Basic handling procedures for the saw.

Vertical straight cross cut (fig. A1 & P)

Procedure for making vertical straight cross cuts.

Performing a sliding cut (fig. Q)

Instructions for making sliding cuts on larger workpieces.

Cutting small pieces (fig. K1 & K2)

Techniques for safely cutting small workpieces.

Vertical mitre cross-cut (fig. A1 & R)

Procedure for performing vertical mitre cross-cuts.

Bevel cuts (fig. A1, K1 & S)

Instructions for setting and performing bevel cuts.

Compound mitre

How to perform cuts combining mitre and bevel angles.

Sawing in the bench mode

Guidelines for operating the saw in bench mode.

Ripping (fig. T)

Procedure for ripping wood pieces.

Transporting (fig. B)

Safe methods for transporting the saw.

Optional Accessories

Clamping the workpiece (fig. A3)

Using an accessory to secure the workpiece.

Support for long pieces (fig. A4)

Methods for supporting long workpieces during cutting.

Dust Collection Port (fig. A5, V)

Information on connecting the dust collection port.

Protecting the Environment

GUARANTEE