To Next PageTo Next Page
Need help?Do you have a question about the DeWalt D28493 and is the answer not in the manual?
General| Power Source | Corded |
|---|---|
| Wheel Diameter | 230 mm |
| Max. Disc Diameter | 230 mm |
| Spindle Thread | M14 |
| Weight | 5.9 kg |
| Length | 510 mm |
| Cable Length | 2.5 m |
| Voltage | 230 V |
| No Load Speed | 6500 rpm |
Guidelines for maintaining a clean and safe working environment.
Precautions related to electrical connections and tool grounding for user protection.
Recommendations for staying alert, proper attire, and avoiding hazards.
Best practices for operating tools, securing work, and routine maintenance.
Importance of using authorized personnel for repairs and adjustments.
Essential safety measures when operating grinders, including guards and inspection.
Ensuring accessories match or exceed tool speed ratings to prevent failure.
Introduction to the various angle grinder/sander models and their operating speeds.
Visual guide to identifying essential parts of the tool.
Description of trigger switch, lock-on button, and handle functionality.
Instructions for rotating the gear case and positioning the side handle.
Information on the top bumper and the spindle lock mechanism.
Procedures for mounting various grinding wheels and sanding discs.
Guidelines for mounting and using wire wheels, flaring cup stones, and cutting wheels.
Advice on selecting and using correct accessories like guards and flanges.
Step-by-step instructions for attaching the side handle and rotating the rear handle.
Detailed explanation of trigger switch control and the lock-on feature.
Requirements for connecting the tool to a suitable electrical power source.
Steps for correctly installing and removing the protective guard.
Instructions for securely attaching hubbed wheels to the spindle.
Procedures for mounting non-hubbed wheels using specific flanges.
How to perform surface grinding and edge grinding safely and effectively.
Guidelines for using sanding flap discs for surface finishing applications.
Mounting and using sanding backing pads and discs with various grit papers.
Steps for attaching and operating wire brushes and wheels for cleaning tasks.
Instructions for installing the specific guard for flaring cup wheels.
Guidance on installing and operating flaring cup wheels for heavy removal.
Procedures for mounting and operating abrasive or diamond cutting wheels.
Steps for mounting the closed guard required for cutting wheels.
Detailed instructions for mounting and using cutting wheels safely.
Recommended methods for cleaning the tool's interior and exterior.
Information on authorized repairs and replacing worn motor brushes.
Details on where to buy recommended accessories and related safety.
Overview of the tool's limited warranty, free service, and money-back guarantee.
Information on warranty coverage, free service, and obtaining replacement warning labels.
