To Next PageTo Next Page
Need help?Do you have a question about the DeWalt D28494 and is the answer not in the manual?
Keeps the workspace tidy and well-lit to prevent accidents.
Covers safe electrical practices, grounding, and tool insulation types.
Lists and identifies the main parts of the angle grinder and sander.
Details the trigger switch and lock-on button for tool operation.
Describes how to position the rear handle for better control.
Explains how to rotate the gear case for specific applications.
Covers the various positions for attaching the side handle for optimal grip.
Information on the top bumper and its replacement.
Explains the function and use of the spindle lock mechanism.
Lists available attachments for the grinder and where to purchase them.
Step-by-step guide on how to attach the side handle to the tool.
Instructions for adjusting the position of the rear handle.
How to turn the tool on and off using the trigger switch.
How to use the lock-on feature for continuous operation.
Information regarding the removal of the lock-on feature.
Guidance on connecting the grinder to a suitable power source.
Steps for installing and removing the protective guard for wheels.
Procedure for attaching and detaching hubbed wheels.
Steps for installing wire brushes and wheels.
Guidance on using wire brushes and wheels for cleaning and smoothing.
How to install the proper guard for flaring cup wheels.
Steps for installing the closed guard for type 1 wheels.
Instructions for cleaning dust and grit from the tool's motor housing.
General
