25
ENGLISH
CHOPSAW D28700
standardised test given in EN 61029 and may be
used to compare one tool with another. It may be
used for a preliminary assessment of exposure.
WARNING: The declared vibration
emission level represents the main
applications of the tool. However if the
tool is used for different applications,
with different accessories or poorly
maintained, the vibration emission may
differ. This may significantly increase the
exposure level over the total working
period.
An estimation of the level of exposure to
vibration should also take into account
the times when the tool is switched off or
when it is running but not actually doing
the job. This may significantly reduce
the exposure level over the total working
period.
Identify additional safety measures to
protect the operator from the effects of
vibration such as: maintain the tool and
the accessories, keep the hands warm,
organisation of work patterns.
Fuses
Europe 230 V tools 10 Amperes, mains
U.K. & Ireland 230 V tools 13 Amperes, in plugs
U.K. & Ireland 115 V tools 16 Amperes, in plugs
Defi nitions: Safety Guidelines
The definitions below describe the level of severity for
each signal word. Please read the manual and pay
attention to these symbols.
DANGER: Indicates an imminently
hazardous situation which, if not avoided,
will result in death or serious injury.
WARNING: Indicates a potentially
hazardous situation which, if not avoided,
could result in death or serious injury.
CAUTION: Indicates a potentially
hazardous situation which, if not avoided,
may result in minor or moderate
injury.
NOTICE: Indicates a practice not
related to personal injury which, if
not avoided, may result in property
damage.
Denotes risk of electric shock.
Congratulations!
You have chosen a DEWALT tool. Years of
experience, thorough product development and
innovation make D
EWALT one of the most reliable
partners for professional power tool users.
Technical Data
D28700
Voltage V
DC
230
UK & Ireland V
DC
230/115
Type 1
Power input W 2,200
No-load speed min
-1
3,800
Min. peripheral speed
cutting disc m/s 80
Disc diameter mm 355
Disc bore mm 25.4
Disc body thickness mm 2.66
Type of cutting disc straight, non-recessed
Cross-cutting capacity at 90°
circular mm 115
square mm 119 x 119
rectangular mm 115 x 130
angular mm 137 x 137
Cross-cutting capacity at 45°
circular mm 98
square mm 98 x 98
rectangular mm 115 x 98
angular mm 98 x 98
Weight kg 18
L
PA
(sound pressure) dB(A)
98.5
K
PA
(sound pressure
uncertainty) dB(A)
2.8
L
WA
(sound power) dB(A)
107
K
WA
(sound power uncertainty) dB(A)
2.8
Vibration total values (triax vector sum) determined according to
EN 61029:
Vibration emission value a
h
a
h
=
m/s²
4.3
Uncertainty K = m/s²
2.1
The vibration emission level given in this information
sheet has been measured in accordance with a
To Next Page
Loading...
Need help?
General
