DeWalt D28715 User Manual

4
English
HEAVY-DUTY 355 mm (14") CHOP SAW WITH
QUICK-CHANGE CLAMP D28715
English (original instructions)
Congratulations!
You have chosen a D
e
WALT tool. Years of
experience, thorough product development and
innovation make D
e
WALT one of the most reliable
partners for professional power tool users.
Technical Data
D28715 D28715LX
Voltage V
AC
230 115
UK & Ireland V
AC
230 115
Type 2 2
Power Input W 2200 2200
No-load speed min
-1
4000 4000
Min. peripheral speed cutting disc m/s 80 80
Disc diameter mm 355 355
Disc bore mm 25.4 25.4
Disc body thickness mm 3.1 3.1
Type of cutting disc straight, non-recessed
Cross-cutting capacity at 90˚
circular mm 130
square mm 120 x 120
rectangular mm 100 x 200
angular mm 140 x 140
Cross-cutting capacity at 45
circular mm 130
square mm 110 x 110
rectangular mm 100 x 140
angular mm 120 x 120
Weight kg 18.5 18.5
Noise values and vibration values (triax vector sum) according to
EN61029-2-10:
L
PA
(emission sound pressure
level)
dB(A) 100 98
L
WA
(sound power level) dB(A) 112 111
K (uncertainty for the given
sound level)
dB(A) 3 3
Vibration emission
value a
h
=
m/s
2
6.2 5.3
Uncertainty K = m/s
2
1.5 1.5
The vibration emission level given in this information
sheet has been measured in accordance with a
standardised test given in EN60745 and may be
used to compare one tool with another. It may be
used for a preliminary assessment of exposure.
WARNING: The declared vibration
emission level represents the main
applications of the tool. However if the
tool is used for different applications,
with different accessories or poorly
maintained, the vibration emission may
differ. This may significantly increase the
exposure level over the total working
period.
An estimation of the level of exposure to
vibration should also take into account
the times when the tool is switched off
or when it is running but not actually
doing the job. This may significantly
reduce the exposure level over the total
working period.
Identify additional safety measures to
protect the operator from the effects of
vibration such as: maintain the tool and
the accessories, keep the hands warm,
organisation of work patterns.
Fuses:
Europe 230V tools 10 Amperes, mains
U.K. & Ireland 230V tools 13 Amperes, in plugs
Definitions: Safety Guidelines
The definitions below describe the level of severity
for each signal word. Please read the manual and
pay attention to these symbols.
DANGER: Indicates an imminently
hazardous situation which, if not avoided,
will result in death or serious injury.
WARNING: Indicates a potentially
hazardous situation which, if not avoided,
could result in death or serious injury.
CAUTION: Indicates a potentially
hazardous situation which, if not avoided,
may result in minor or moderate
injury.
NOTICE: Indicates a practice not
related to personal injury which, if
not avoided, may result in property
damage.

DeWalt D28715 Specifications

General

Product type	Standard miter saw
Cutting capacity 0°	130 mm
Power consumption (typical)	1350 W
Bevel type	Single bevel
Table saw mode	-
Idle speed (max)	4000 RPM
Sound pressure level	112 dB
Sound level uncertainty	3, 100 dB
Cross cut capacity (0° x 0°)	140 x 140 mm
Compound cut capacity (45° x 45°)	120 x 120 mm
Input power	2200 W
Power source	AC
Blade diameter	355 mm
Blade thickness	2.5 mm

Weight and Dimensions

Width	520 mm
Height	435 mm
Weight	18000 g