DeWalt DCCS670 User Manual

ENGLISH
1
English (original instructions)
Definitions: Safety Alert Symbols and Words
This instruction manual uses the following safety alert symbols and words to alert you to hazardous situations and your risk
of personal injury or property damage.

DANGER: Indicates an imminently hazardous situation which, if not avoided, will result in death or seriousinjury.

WARNING: Indicates a potentially hazardous situation which, if not avoided, could result in death or seriousinjury.

CAUTION: Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderateinjury.

(Used without word) Indicates a safety related message.
NOTICE: Indicates a practice not related to personal injury which, if not avoided, may result in propertydamage.

WARNING! Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
seriousinjury.
WARNING: To reduce the risk of injury, read the
instructionmanual.
If you have any questions or comments about this or
any
DeWALT tool, call us toll free at:
1-800-4-
DeWALT (1-800-433-9258).
1
Variable speed trigger
switch
2
Lock-off lever
3
Chain brake / front hand
guard
4
Guide bar
5
Saw chain
6
Sprocket cover
7
Battery Pack
8
Bar adjust locking knob
9
Chain tensioning knob
10
Oil level indicator
11
Guide bar scabbard
12
Rear handle
13
Front handle
14
Battery housing
15
Battery release button
16
Oil cap (not shown)
Fig. A
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15

DeWalt DCCS670 Specifications

General

Bar Length	16 inches
Power Source	Battery
Battery Voltage	60 V
Chain Pitch	3/8 inch
Automatic Oiler	Yes
Tool-Free Chain Tensioning	Yes
Battery Compatibility	DeWalt 60V FlexVolt
Chain Speed	25.2 m/s
Weight	12.2 lbs (without battery)
Chain Gauge	0.043 inch