EasyManua.ls Logo

DeWalt DCD700 - Technical Data; Tool Specifications; Battery Pack Specifications; Charger DCB100 Specifications

DeWalt DCD700
40 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ENGLISH
3
12V MAX* CORDLESS ADJUSTABLE CLUTCH
DRILL/DRIVER
DCD700
Congratulations!
You have chosen a DEWALT tool. Years of
experience, thorough product development and
innovation make DEWALT one of the most reliable
partners for professional power tool users.
Technical Data
DCD700
Voltage V
DC
12V Max*
Type 4
Battery type Li-Ion
No-load speed:
1st gear min
-1
0400
2nd gear min
-1
01500
Max torque Nm 24
Power output (MWO) W 180
Chuck capacity mm 10
Maximum drilling capacity:
Wood mm 20
Metal mm 10
Weight (without battery pack) kg 0.91
* Maximum initial battery voltage (measured without a workload)
is 12 volts. Nominal voltage is 10.8.
Battery pack DCB125-B5
Battery type Li-Ion
Voltage V
DC
12V Max*
Capacity A
h
1.3
Weight kg 0.2
Charger DCB107-B5
Mains voltage V
AC
220–240
Battery type Li-Ion
Approximate min 60
charging time (1.3 Ah)
of battery packs
Weight kg 0.29
Defi nitions: Safety Guidelines
The definitions below describe the level of severity
for each signal word. Please read the manual and
pay attention to these symbols.
DANGER: Indicates an imminently
hazardous situation which, if not avoided,
will result in death or serious injury.
WARNING: Indicates a potentially
hazardous situation which, if not
avoided, could result in death or
serious injury.
CAUTION: Indicates a potentially
hazardous situation which, if not
avoided, may result in minor or
moderate injury.
NOTICE: Indicates a practice not
related to personal injury which, if
not avoided, may result in property
damage.
Denotes risk of electric shock.
Denotes risk of fire.
WARNING: To reduce the risk of injury,
read the instruction manual.
General Power Tool Safety Warnings
WARNING! Read all safety warnings
and all instructions. Failure to follow
the warnings and instructions may result
in electric shock, fire and/or serious
injury.
SAVE ALL WARNINGS AND INSTRUCTIONS
FOR FUTURE REFERENCE
The term “power tool” in the warnings refers to your
mains-operated (corded) power tool or battery-
operated (cordless) power tool.
1) WORK AREA SAFETY
a) Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
b) Do not operate power tools in explosive
atmospheres, such as in the presence of

Other manuals for DeWalt DCD700

Related product manuals