DeWalt DCD785 Original Instructions

English
14
DeWALT provides a facility for the collection and
recycling of D
eWALT products once they have
reached the end of their working life. To take
advantage of this service please return your product
to any authorised repair agent who will collect them
on our behalf.
You can check the location of your nearest
authorised repair agent by contacting your local
D
eWALT office at the address indicated in this
manual. Alternatively, a list of authorised D
eWALT
repair agents and full details of our after-sales
service and contacts are available on the Internet at:
www.2helpU.com.
Rechargeable Battery Pack
This long life battery pack must be recharged when
it fails to produce sufficient power on jobs which
were easily done before. At the end of its technical
life, discard it with due care for our environment:
• Runthebatterypackdowncompletely,then
remove it from the tool.
• Li-Ioncellsarerecyclable.Takethemtoyour
dealer or a local recycling station. The collected
battery packs will be recycled or disposed of
properly.

DeWalt DCD785 Specifications

General

Voltage	18V
Chuck Size	1/2 inch
Speed Settings	2
No Load Speed	0-600 / 0-2000 RPM
Battery Type	Lithium-Ion
Power Source	Cordless
Clutch Settings	14
Hammering Mode	Yes
Chuck Type	Keyless
Beats per Minute	0-10, 200 / 0-34, 000 BPM