Need help?Do you have a question about the DeWalt DCD925 and is the answer not in the manual?
Explains DANGER, WARNING, CAUTION, NOTICE for safety.
Location of the year of manufacture marking.
Precautions for electrocution, shock, foreign matter, and damage.
Balances battery cells for optimal performance.
Manages charging based on battery temperature.
Covers usage in hazardous areas, correct charging, and handling.
Prevents short circuits and fire by covering battery contacts.
Specifies voltage for different tool models.
Details for DE9116 and DE9135 charger models.
Guide to inserting battery, charging, and completion indicators.
Minimum 10-hour charge before first use for battery longevity.
Precautions for leakage, fire, and damage.
Precautions for fire, skin contact, and respiratory irritation.
Procedure for inserting and removing the battery pack.
Operation of the trigger switch for speed control and braking.
Proper use of side handle and forward/reverse control button.
Integrated light for immediate work surface illumination.
Switching between drilling, screwdriving, and hammerdrilling modes.
Setting the clutch for desired torque in screwdriving mode.
Selecting speed settings for versatility and torque.
Inserting and removing accessories using the chuck sleeve.
Observe safety, disconnect for adjustments, proper hand position.
Power tool requires no additional lubrication.
Instructions for cleaning housing and charger safely.
Proper disposal and recycling of battery packs.
Return product within 30 days for refund or exchange.
Entitlement to one free service within 12 months of purchase.
Covers defects due to faulty materials or workmanship.
To Next Page
General
