DeWalt DCD985M2 User Manual

DCD980 20V Max* Heavy-Duty 1/2" (13 mm) Cordless Drill/Driver
DCD985 20V Max* Heavy-Duty 1/2" (13 mm) Cordless Hammerdrill/Drill/Driver
DCD980 Perceuse/visseuse industrielle sans fil 13mm (1/2po) de 20 V max*
DCD985 Marteau perforateur/Perceuse/Visseuse industrielsans fil 13 mm (1/2 po) de 20 V max*
Taladro/destornillador inalámbrico de 1/2 pulg. (13 mm) para trabajos pesados de 20 V Máx* DCD980
Taladro percusor/taladro/destornillador inalámbrico de 1/2 pulg. (13 mm) para trabajos pesados de 20 V Máx* DCD985
INSTRUCTION MANUAL
GUIDE D'UTILISATION
MANUAL DE INSTRUCCIONES
INSTRUCTIVO DE OPERACIÓN, CENTROS DE SERVICIO Y PÓLIZA DE
GARANTÍA. ADVERTENCIA: LÉASE ESTE INSTRUCTIVO ANTES DE
USAR EL PRODUCTO.
If you have questions or comments, contact us.
Pour toute question ou tout commentaire, nous contacter.
Si tiene dudas o comentarios, contáctenos.
1-800-4-DEWALT • www.dewalt.com

DeWalt DCD985M2 Specifications

General

Voltage	20V
Chuck Size	1/2 inch
Speed Settings	3
Battery Included	Yes
Battery Type	Lithium-Ion
No Load Speed	0-575/0-1350/0-2000 rpm

Summary

General Power Tool Safety Warnings

Work Area Safety

Importance of a clean, well-lit area and keeping bystanders away.

Electrical Safety

Ensuring proper plugs, avoiding wet conditions, and proper cord use.

Personal Safety

Stay Alert and Use PPE

Power Tool Use and Care

Proper Tool Application

Disconnect Power Before Adjustments

Battery Tool Use and Care

Drill/Driver/Hammerdrill Specific Safety

Handle and Grip Precautions

Using auxiliary handles and gripping the tool firmly with both hands.

Eye and Ear Protection

Hazardous Dust Warning

Warning about chemicals in dust from construction activities.

Battery Pack Safety Instructions

General Battery Pack Handling

Lithium-Ion Battery Safety

Handling and Fire Prevention

Battery Charger Safety

Instructions to save manual for battery charger safety and operating procedures.

Important Charging Notes

Optimal Charging Environment

Charger and Battery Pack Hazards

Warnings about shock and burn hazards related to chargers and battery packs.

Variable Speed Trigger Switch

Side Handle Usage

Installation and Grip

Warning to always use the side handle properly installed and grip firmly.

Forward/Reverse Control Button

Mode Control Collar Operations

Torque Adjustment Collar

Three-Speed Gearing System

Keyless Single Sleeve Chuck

Accessory Insertion and Tightening

Safety Warnings for Chuck Use

Warnings against improper chuck use and ensuring bit security.

Belt Hook and Bit Clip

Attachment and Usage Warnings

Warnings about secure attachment and proper usage of belt hook/bit clip.

Battery Pack Installation and Removal

Installing the Battery Pack

Removing the Battery Pack

Drilling Operation

Drilling Techniques and Warnings

Using back-up blocks, applying pressure, and warnings about drill stalls.

Screwdriving Operation

Selecting Torque and Speed

Hammerdrilling Operation

Hammerdrilling Setup and Bit Usage

Selecting gear/mode and using proper carbide-tipped bits for hammer drilling.

Accessories Usage

Warning on Non-DEWALT Accessories

Warning about the hazards of using accessories not offered by DEWALT.

Maintenance and Cleaning

General Tool Maintenance

Charger Cleaning Precautions

Warning about shock hazard and disconnecting the charger before cleaning.

DEWALT Limited Warranty