Need help?Do you have a question about the DeWalt DCD945 and is the answer not in the manual?
General| Voltage | 18 V |
|---|---|
| Speed Settings | 3 |
| Type | Drill Driver |
| Chuck Size | 1/2 inch |
| RPM | 0-450 / 0-2, 000 |
| No Load Speed (RPM) | 0-450 / 0-2, 000 |
Details voltage, battery type, power output, speeds, torque, and capacity.
Covers max drilling capacity, weight, sound pressure, and sound power levels.
Provides vibration emission values for drilling and impact drilling.
Explanation of vibration emission levels and factors affecting exposure.
Definitions of signal words (DANGER, WARNING, CAUTION) for safety.
Statement of compliance with Machinery Directive and relevant standards.
Covers work area, electrical safety measures, and personal safety precautions.
Guidelines for operator alertness, protective equipment, and preventing unintentional starting.
Instructions for proper tool usage, maintenance, and storage to prevent hazards.
Safety instructions for using and caring for battery-powered tools and battery packs.
Additional safety precautions specific to the operation of drills and hammerdrills.
Identifies inherent residual risks, tool markings, and date code position.
Crucial safety and operating instructions specifically for DEWALT battery chargers.
Details charger types, charging process, and initial charging recommendations.
Covers automatic refresh, hot/cold pack delay, Li-Ion protection, and battery pack safety.
Covers battery cap use, different battery pack types for models.
Recommendations for battery storage and specific safety instructions for NiCd/NiMH and Li-Ion.
Lists package contents and defines the intended applications for the tools.
Overview of tool parts and essential electrical safety precautions.
Instructions for mains plug replacement and using extension cables with chargers.
Step-by-step guide for installing and removing the battery pack from the tool.
Explains variable speed switch, side handle use, and forward/reverse control.
Details on the worklight and how to use the mode control collar.
Guides on torque adjustment, three-speed gearing, and keyless chuck usage.
Correct hand positioning and step-by-step guide for drilling operations.
Step-by-step guidance for screwdriver and hammerdrill operations.
Procedures for cleaning the tool and advice on lubrication.
Guidelines for product disposal and recycling of battery packs.
Advice on using only DEWALT recommended accessories for safety.
Outlines the 30-day satisfaction guarantee, free service contract, and full warranty terms.
To Next Page
