DeWalt DCF787 Instruction Manual

ENGLISH
1
English (original instructions)
Definitions: Safety Alert Symbols and Words
This instruction manual uses the following safety alert symbols and words to alert you to hazardous situations and your risk
of personal injury or property damage.

DANGER: Indicates an imminently hazardous situation which, if not avoided, will result in death or seriousinjury.

WARNING: Indicates a potentially hazardous situation which, if not avoided, could result in death or seriousinjury.

CAUTION: Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderateinjury.

(Used without word) Indicates a safety related message.
NOTICE: Indicates a practice not related to personal injury which, if not avoided, may result in propertydamage.

WARNING! Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
seriousinjury.
WARNING: To reduce the risk of injury, read the
instructionmanual.
If you have any questions or comments about this or
any
DeWALT
tool, call us toll free at:
1-800-4-
DeWALT
(1-800-433-9258).
1
Trigger switch
2
Forward/reverse button
3
Chuck collar
4
1/4" (6.35 mm) hex quick-release chuck
5
Battery release button
6
Battery pack
7
Worklight
8
Belt hook (optional accessory)
9
Mounting screw
Fig. A
2
1
3
5
7
8
9
6
4

DeWalt DCF787 Specifications

General

Voltage	20V
Drive Size	1/4 in
No Load Speed	0-2, 800 RPM
Max Torque	1, 500 in-lbs
Impacts Per Minute	0-3, 200 IPM
Tool Length	5.55 in
Battery Type	Lithium Ion