To Next PageTo Next Page
Need help?Do you have a question about the DeWalt DCG412 and is the answer not in the manual?
General| Protective housing | Yes |
|---|---|
| Vibration emission | 6 m/s² |
| Product color | Black, Yellow |
| Power source | Battery |
| Battery voltage | 18 V |
| Idle speed (max) | 7000 RPM |
| Grinding disc diameter | 125 mm |
Weight and Dimensions| Weight | 2200 g |
|---|
Guidelines for maintaining a safe work environment during tool operation.
Essential safety measures related to the tool's electrical components and usage.
Crucial personal safety practices and precautions for tool operators.
Proper methods for using and maintaining the power tool to ensure safety and longevity.
Guidelines for the safe use and maintenance of battery-powered tools.
General safety guidelines applicable to multiple operation types.
Explains kickback and provides methods to prevent it.
Safety rules unique to grinding and abrasive cutting tasks.
Further safety advice specifically for abrasive cutting operations.
Safety precautions to follow when performing sanding operations.
Safety instructions for polishing tasks using the tool.
Safety guidelines for using wire brushes on the tool.
Critical safety guidelines for handling and charging battery packs.
Information about DEWALT chargers and the steps for charging battery packs.
Explains indicator lights, hot/cold delay, and other important charging notes.
Key recommendations for optimal battery charging performance.
Guidelines for storing the tool and battery packs properly.
Instructions for attaching the side handle and rotating the gear case.
Steps for inserting and removing the battery pack from the tool handle.
Explains switch functions and how to read battery fuel gauges.
Overview of different types of wheels, brushes, and discs for the tool.
Details and illustrations of specific accessory types.
Details and illustrations of flap discs and cutting wheels for the tool.
Procedures for mounting different types of grinding wheels and flap discs.
Guides for performing surface and edge grinding operations safely and effectively.
Safety measures for individuals in the work area during paint sanding.
Precautions to minimize dust generation and environmental impact.
Steps for mounting and using wire cup brushes and wheels for various tasks.
Procedure for installing the protective Type 1 guard for cutting wheels.
Guidelines for maintaining the tool's performance and condition.
Information on recommended accessories and how to register the product.
Details on the tool's warranty, free service periods, and money-back guarantee.
