DeWalt DCG413N - Page 41

39
ENGLISH
and the accessories, keep the hands warm, organisation
of workpatterns.
EC‑Declaration of Conformity
Machinery Directive
Cordless Small Angle Grinder
DCG413
DeWALT declares that these products described under
Technical Data are in compliance with:
2006/42/EC, EN60745‑1:2009+A11:2010, EN60745‑2‑3:2011
+A2:2013 +A11:2014 +A12:2014 +A13:2015.
These products also comply with Directive 2014/30/EU and
2011/65/EU. For more information, please contact DeWALT at
the following address or refer to the back of themanual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf ofDeWALT.
Markus Rompel
Director Engineering
DeWALT, Richard‑Klinger‑Straße 11,
D‑65510, Idstein, Germany
18.10.2023
DECLARATION OF CONFORMITY
MACHINERY AND RADIO EQUIPMENT
REGULATIONS
Cordless Small Angle Grinder
DCG413
DeWALT declares that these products described under
“technical data” are in compliance with:
EN60745‑1:2009+A1:2010, EN60745‑2‑3:2011+A2:2013+A11:20
14+A12:2014+A13:2015.
These products conform to the following UK Regulations
The Supply of Machinery (Safety) Regulations, 2008, S.I.
2008/1597 (asamended).
The Radio Equipment Regulations 2023, S.I. 2023/1206
(asamended)
Congratulations!
You have chosen a DeWALT tool. Years of experience, thorough
product development and innovation make DeWALT one of the
most reliable partners for professional power toolusers.
Technical Data
DCG413
Voltage V
DC
18
Type 1
Battery type Li‑Ion
Power output W 800
No‑load/rated speed
min
‑1
9000
Wheel diameter
mm 115
Wheel thickness (max)
mm 6
Spindle diameter
M14
Spindle length
mm 21.5
Weight (without battery pack)* kg 1.74
* weight includes side handle and guard
Noise values and vibration values (triax vector sum) according to EN60745‑2‑3:
L
PA
(emission sound pressure level) dB(A) 84
L
WA
(sound power level) dB(A) 95
K (uncertainty for the given sound level) dB(A) 3
Surface grinding
Vibration emission value a
h,AG
= m/s
2
5.8
Uncertainty K = m/s
2
1.5
Disc sanding
Vibration emission value a
h,DS
= m/s
2
<2.5
Uncertainty K = m/s
2
1.5
The vibration emission level given in this information sheet has
been measured in accordance with a standardised test given in
EN60745 and may be used to compare one tool with another. It
may be used for a preliminary assessment ofexposure.

WARNING: The declared vibration emission level
represents the main applications of the tool. However if
the tool is used for different applications, with different
accessories or poorly maintained, the vibration emission
may differ. This may significantly increase the exposure
level over the total workingperiod.
An estimation of the level of exposure to vibration should
also take into account the times when the tool is switched
off or when it is running but not actually doing the job.
This may significantly reduce the exposure level over the
total workingperiod.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool
English (original instructions)
CORDLESS SMALL ANGLE GRINDER
DCG413