DeWalt DCG413N - Page 49

47
ENGLISH
Read instruction manual beforeuse.
See Technical Data for chargingtime.
Do not probe with conductiveobjects.
Do not charge damaged batterypacks.
Do not expose to water.
Have defective cords replacedimmediately.
Charge only between 4˚C and 40˚C.
Only for indooruse.
Discard the battery pack with due care for
theenvironment.
Charge DeWALT battery packs only with designated
DeWALT chargers. Charging battery packs other
than the designated DeWALT batteries with a
DeWALT charger may make them burst or lead to
other dangeroussituations.
Do not incinerate the batterypack.
USE (without transport cap). Example: Wh rating
indicates 108Wh (1 battery with 108Wh).
TRANSPORT (with built‑in transport cap). Example:
Wh rating indicates 3x 36Wh (3batteries of 36Wh).
Battery Type
These battery packs may be used: DCB181, DCB182, DCB183,
DCB183B, DCB183G, DCB184, DCB184B, DCB184G, DCB185,
DCB187, DCB189, DCBP034, DCBP034G, DCBP518, DCBP518G,
DCB546, DCB547, DCB547G, DCB548. Refer to Technical Data
for moreinformation.
Package Contents
The package contains:
1 Angle grinder
1 Type 27Guard
1 Type 1Guard
1 Side handle
1 Backing flange
1 Locking flange
1 Hex wrench
1 Li‑Ion battery pack (C1, D1, E1, H1, L1, M1, P1, S1, T1, X1
models)
2 Li‑Ion battery packs (C2, D2, E2, H2, L2, M2, P2, S2, T2, X2
models)
3 Li‑Ion battery packs (C3, D3, E3, H3, L3, M3, P3, S3, T3, X3
models)
1 Instruction manual
• Check for damage to the tool, parts or accessories which may
have occurred duringtransport.
• Take the time to thoroughly read and understand this manual
prior tooperation.
Markings on Tool
The following pictograms are shown on the tool:
Read instruction manual beforeuse.
Wear earprotection.
Wear eyeprotection.
Always operate with twohands.
Date Code Position (Fig. D)
The date code
15
which also includes the year of manufacture,
is printed into thehousing.
Example:
2023XX XX
Year of Manufacture
Description (Fig. A)

WARNING: Never modify the power tool or any part of it.
Damage or personal injury couldresult.
1
Paddle switch
2
Lock‑off lever
3
Spindle lock button
4
Spindle
5
Backing flange
6
Locking flange
7
Guard
8
Guard release lever
9
Battery pack
10
Battery release button
Intended Use
Your cordless angle grinder has been designed for professional
cutting, grinding, sanding and wire brushapplications.
DO NOT use grinding wheels other than centre depressed
wheels and flapdiscs.
DO NOT use under wet conditions or in the presence of
flammable liquids orgases.

DANGER: Do not use for wood cutting or woodcarving.
Do not use toothed blades of any kind. Serious injury
canresult.
Your cordless angle grinder is a professional powertool.