ENGLISH
23
other battery packs may create a risk of injury
and fire.
c) When battery pack is not in use, keep it
away from other metal objects like paper
clips, coins, keys, nails, screws or other
small metal objects that can make a
connection from one terminal to another.
Shorting the battery terminals together may
cause burns or a fire.
d) Under abusive conditions, liquid may be
ejected from the battery; avoid contact.
If contact accidentally occurs, flush with
water. If liquid contacts eyes, additionally
seek medical help. Liquid ejected from the
battery may cause irritation or burns.
SERVICE
a) Have your worklight serviced by a
qualified repair person using only
identical replacement parts. This will
ensure that the safety of the worklight is
maintained.
Additional Specifi c Safety Rules for
Worklights
WARNING: Fire hazard. Do not operate
worklight near flammable liquids or in
gaseous or explosive atmospheres.
Internal sparks may ignite fumes causing
personal injury.
• Do not expose light to wet or damp areas. Do
not expose light to rain or snow.
• Do not wash light with water or allow water to
get inside light. Do not submerge light in water
at any time.
WARNING: Do not place the worklight
in a position which may cause anyone
to intentionally or unintentionally stare
into the light. Serious eye injury could
result.
CAUTION: When not in use, place
worklight on its side on a stable
surface where it will not cause a
tripping or falling hazard. Some
products with large battery packs will
stand upright on the battery pack but
may be easily knocked over.
Markings on Tool
The following pictograms are shown on the
worklight:
Read instruction manual before use.
Hazardous optical radiation.
DATE CODE POSITION
The date code, which also includes the year of
manufacture, is printed into the housing surface that
forms the mounting joint between tool and battery.
Example:
2014 XX XX
Year of Manufacture
Important Safety Instructions for All
Battery Chargers
SAVE THESE INSTRUCTIONS: This manual
contains important safety and operating instruc tions
for the DCB105 battery charger.
• Before using the charger, read all instructions
and cautionary markings on charger, battery
pack and product using the battery pack.
WARNING: Shock hazard. Do not allow
any liquid to get inside charger. Electric
shock may result.
CAUTION: Burn hazard. To reduce
the risk of injury, charge only DEWALT
rechargeable battery packs. Other types
of batteries may overheat and burst
resulting in personal injury and property
damage.
CAUTION: Children should be
supervised to ensure that they do not
play with the appliance.
NOTICE: Under certain conditions, with
the charger plugged in to the power
supply, the exposed charging contacts
inside the charger can be shorted by
foreign material. Foreign materials of
a conductive nature such as, but not
limited to, steel wool, aluminum foil or
any buildup of metallic particles should
be kept away from charger cavities.
Always unplug the charger from the
power supply when there is no battery
pack in the cavity. Unplug charger
before attempting to clean.
• DO NOT attempt to charge the battery pack
with any chargers other than the ones in
this manual. The charger and battery pack are
specifically designed to work together.
• These chargers are not intended for
any uses other than charging DEWALT
rechargeable batteries. Any other uses
may result in risk of fire, electric shock or
electrocution.
To Next Page
Loading...
