DeWalt DCL510 - Hot;Cold Pack Delay Feature; DCB105 Pack Delay; DCB107 and DCB112 Pack Delay; Battery Electronic Protection System

English
11
Hot/Cold Pack Delay
DCB105
When the charger detects a battery that is too hot or too cold, it
automatically starts a Hot/Cold Pack Delay, suspending charging until
the battery has reached an appropriate temperature. The charger then
automatically switches to the pack charging mode. This feature ensures
maximum battery life.
DCB107 AND DCB112
When the charger detects a battery that is hot, it automatically delays
charging until the battery has cooled.
When the charger detects a battery that is cold, it automatically delays
charging until the battery has warmed.
The red light will continue to blink, but a yellow indicator light will
be illuminated during this operation. Once the battery has cooled,
the yellow light will turn off and the charger will resume the charging
procedure.
XR Li-Ion tools are designed with an Electronic Protection System
that will protect the battery against overloading, overheating or deep
discharge.
The tool will automatically turn off if the Electronic Protection System
engages. If this occurs, place the Li-Ion battery on the charger until it is
fully charged.
LI-ION BATTERY PACKS ONLY
Li-Ion batteries are designed with an Electronic Protection System
that will protect the battery against overloading, overheating or deep
discharge.
The tool will automatically turn off if the Electronic Protection System
engages. If this occurs, place the Li-Ion battery on the charger until it is
fully charged.