DeWalt DCMASBC1 - Residual Risks; Package Contents; Markings on Tool; Description (Fig. A)

6
ENGLISH
Description (Fig. A)

WARNING: Never modify the tool. Damage or personal
injury couldresult.
1
Brush cutter pole
2
Guard
3
Brush cutter housing
4
Brush cutter blade
Intended Use
Your brush cutter attachment has been designed to be used
with your DCMAS5713 powerhead. This brush cutter has been
designed for household trimmingapplications.
DO NOT use under wet conditions or in the presence of
flammable liquids orgases.
DO NOT let children come into contact with the tool. Supervision
is required when inexperienced operators use thistool.
Date Code Position (Fig.A)
The date code
5
, which also includes the year of manufacture,
is printed into thehousing.
Example:
2020XX XX
Year and week of Manufacture
Wear eyeprotection.
Wear earprotection.
Do not expose the tool to rain or high
humidity or leave outdoors while it israining.
Switch the tool off. Before performing any
maintenance on the tool, remove the battery
from thetool.
Keep bystandersaway.
Wear slip‑resistantfootwear.
Wear slip‑resistantgloves.
Do not use circular metalblades.
No hands
Beware of bladethrust.
Directive 2000/14/EC guaranteed
soundpower.
Package Contents
The package contains:
1 Brush cutter
1 Instruction manual
• Check for damage to the tool, parts or accessories which may
have occurred duringtransport.
• Take the time to thoroughly read and understand this manual
prior tooperation.
Residual Risks
To ensure you have good footing on slopes, do not overreach.
Keep your balance at all times. Always walk, do notrun.
Additional residual risks may arise when using the tool which
may not be included in the enclosed safety warnings. These
risks can arise from misuse, prolonged useetc.
Even with the application of the relevant safety regulations and
the implementation of safety devices, certain residual risks can
not be avoided. These include:
• Injuries caused by touching any rotating/movingparts.
• Injuries caused when changing any parts, blades
oraccessories.
• Injuries caused by prolonged use of a tool. When using any
tool for prolonged periods ensure you take regularbreaks.
• Impairment ofhearing.
• Health hazards caused by breathing dust developed when
using your tool (example: working with wood, especially oak,
beech and MDF.)
• Risk of burns due to accessories becoming hot
duringoperation.
SAVE THESE INSTRUCTIONS
been given supervision or instruction concerning use of the
appliance by a person responsible for theirsafety.
• Do not use this product near bystanders. The metal blade
could throw or richochet small objects that it may come
in contact with, such as small rocks, causing serious injury
tobystandars.
• Children must be supervised to ensure that they do not play
with theappliance.
• When the appliance is stored or transported in a vehicle
it should be placed in the boot or restrained to prevent
movement following sudden changes in speed ordirection.
• When not in use, the battery should be removed. The
appliance should be stored in a dry , well ventilated place out
of reach ofchildren.
• Children should not have access to storedappliances.
Markings on Tool
The following pictograms are shown on the tool:
Read instruction manual beforeuse.