ENGLISH
15
ALL INCIDENTAL OR CONSEQUENTIAL DAMAGES. Some
states do not allow limitations on how long an implied
warranty lasts or the exclusion or limitation of incidental
or consequential damages, so these limitations may not
apply to you. This warranty gives you specific legal rights
and you may have other rights which vary in certain states
orprovinces.
In addition to the warranty
tools are covered
byour:
1 YEAR FREE SERVICE
will maintain the tool and replace worn parts
caused by normal use, for free, any time during the first year
afterpurchase. Nailer wear items such as return springs,
driver blades, and bumpers are not covered.
2 YEARS FREE SERVICE ON D
WALT BATTERY PACKS
DC9071, DC9091, DC9096, DC9182, DC9280, DC9360,
DCB120, DCB122, DCB124, DCB127, DCB201, DCB203BT,
DCB207,DCB361
3 YEARS FREE SERVICE ON D
WALT BATTERY PACKS
DCB200, DCB203, DCB204, DCB204BT, DCB205, DCB205BT,
DCB206, DCB230, DCB606, DCB609, DCB612
NOTE: Battery warranty voided if the battery pack is
tampered with in any way.
is not responsible
for any injury caused by tampering and may prosecute
warranty fraud to the fullest extent permitted bylaw.
90 DAY MONEY BACK GUARANTEE
If you are not completely satisfied with the performance of
your
Power Tool or Nailer for any reason, you can
return it within 90 days from the date of purchase with a
receipt for a full refund – no questionsasked.
LATIN AMERICA: This warranty does not apply to products
sold in Latin America. For products sold in Latin America,
see country specific warranty information contained in
the packaging, call the local company or see website for
warrantyinformation.
FREE WARNING LABEL REPLACEMENT: If your warning
labels become illegible or are missing, call 1-800-4-
(1-800-433-9258) for a freereplacement.
TROUBLESHOOTING GUIDE
MANY COMMON PROBLEMS CAN BE SOLVED EASILY BY UTILIZING THE CHART BELOW. FOR MORE SERIOUS OR PERSISTENT
PROBLEMS, CONTACT A
SERVICE CENTER OR CALL 1-(800)-4-
.
WARNING: To reduce the risk of serious personal injury, ALWAYS disconnect battery pack from tool before
allrepairs.
SYMPTOM CAUSE FIX
Motor does not run with
trigger depressed
Trigger lock in locked position. Unlock trigger lock.
Tool is stalled, locking the motor from rotating. Rotate the stall release lever on the tool and the mechanism
will release. If driver blade does not return, remove battery and
manually push driver blade back to home position.
Tool internal electronics need to be reset. Remove battery, wait 3 seconds and reinsert.
Motor stops running after 5 seconds. Normal operation, release trigger and redepress.
Terminals are dirty or damaged. See authorized service center.
Damaged internal electronics. See authorized service center.
Damaged trigger. See authorized service center.
Motor does not run with contact
trip depressed
Trigger lock in locked position. Unlock trigger lock.
Tool is stalled, locking the motor from rotating. Rotate the stall release lever on the tool and the mechanism
will release. If driver blade does not return, remove battery and
manually push driver blade back to home position.
Bent contact trip. See authorized service center.
Motor stops running after 5 seconds. Normal operation, release contact trip and redepress.
Terminals are dirty or damaged. See authorized service center.
Damaged internal electronics. See authorized service center.
Damaged trigger. See authorized service center.