10
To unlock the trigger switch, press the
lock-off button as shown in Figure 3. Pull
the trigger switch to turn the motor ON.
Releasing the trigger switch turns the
motor OFF.
WARNING: This tool has no provision
to lock the switch in the ON position, and
should never be locked ON by any other
means.
The variable speed trigger switch will
give you added versatility. The further the
trigger is depressed the higher the speed
of the saw.
CAUTION: Use of very slow speed is
recommended only for beginning a cut.
Prolonged use at very slow speed may
damage your saw.
FIG. 3
C
B
UNLOCKED
LOCKED
LED Worklight (Fig. 2)
CAUTION: Do not stare into
worklight. Serious eye injury could result.
E
FIG. 2
L
D
B
J
C
Q
LOOSEN
G
BLADE DIRECTION
STRAIGHT UP
45º
K
H
I
A
To Next Page
Loading...
