o Get to know its safety features, moving parts, and hazards before beginning work.
o Inspect tool for damage.
o Never modify, tamper with, or attempt to change or repair tools and parts on your own.
o If you suspect that a tool may be damaged, malfunctioning or in need of repair, stop
usage immediately, disconnect from power source, and contact the Carhartt Workshop.
Secure a safe workspace.
o Make sure you are working on a clean, dry, level surface.
o Clear any debris, trip, slip, fall hazards.
o Make sure your workspace is properly lit.
o Check that your workspace has proper clearance and is free of obstructions. Including
overhead obstructions such as power lines.
Wear proper PPE
o Do your research and use the proper PPE with the correct safety ratings for the work
you are performing.
o This includes but is not limited to safety glasses, face shields, earplugs, dust masks,
clothes toed shoes, and proper clothing and footwear.
o Never wear baggy clothes, jewelry, or have longhair down and unsecured.
Handle Tools with care
o Never carry power tools by their cords
o Never leave tools unattended.
o Disconnect from power and secure tools when they are not in use.
o Do not carry sharp or pointed tools in your pockets.
Take your time
o Do not rush or force materials through tools.
o Pay attention to your work and surroundings.
To Previous Page
Loading...
Need help?
General
