DeWalt DCS571 - Tool Components and Operation; Tool Description and Parts; Intended Use of the Saw; Battery Pack Installation and Removal

11
ENGLISH
Do not incinerate the batterypack.
Battery Type
The DCS571 operates on a 18 volt batterypack.
These battery packs may be used: DCB181, DCB182, DCB183,
DCB183B, DCB184, DCB184B, DCB185, DCB187, DCB189. Refer to
Technical Data for moreinformation.
Package Contents
The package contains:
1 Cordless circular saw
1 24‑tooth blade
1 Hex key
1 Rip guide
1 Dust extraction port
1 Kitbox(NT, C, D, L, M, P, S, T, X models)
1 Charger(C, D, L, M, P, S, T, X models)
1 Li‑Ion battery pack(C1, D1, L1, M1, P1, S1, T1, X1, Y1 models)
2 Li‑Ion battery packs(C2, D2, L2, M2, P2, S2, T2, X2, Y2 models)
3 Li‑Ion battery packs(C3, D3, L3, M3, P3, S3, T3, X3, Y3 models)
1 Instruction manual
NOTE: Battery packs, chargers and kitboxes are not included
with N models.Battery packs and chargers are not included with
NT models.Bmodels include Bluetooth® batterypacks.
NOTE: The Bluetooth® word mark and logos are registered
trademarks owned by the Bluetooth®, SIG, Inc.and any use of
such marks by
DeWALT is under license.Other trademarks and
trade names are those of their respectiveowners.
• Check for damage to the tool, parts or accessories which may
have occurred duringtransport.
• Take the time to thoroughly read and understand this manual
prior tooperation.
Markings on Tool
The following pictograms are shown on the tool:
Read instruction manual beforeuse.
Wear earprotection.
Wear eyeprotection.
Date Code Position(Fig.A)
The date code
15
, which also includes the year of manufacture,
is printed into thehousing.
Example:
2019 XX XX
Year of Manufacture
Description (Fig. A)

WARNING: Never modify the power tool or any part of
it.Damage or personal injury couldresult.
1
Trigger switch lock‑off
button
2
Trigger switch
3
Battery pack
4
Depth adjustment lever
5
Shoe
6
Lower blade guard
retracting lever
7
Lower blade guard
8
Blade clamping screw
9
Kerf indicator
10
Bevel adjustment knob
11
Blade lock button
12
Auxiliary handle
13
Battery release button
14
Hex key
Intended Use
Your cordless circular saw has been designed for professional
wood sawingapplications.
DO NOT use under wet conditions or in the presence of
flammable liquids orgases.
This circular saw is a professional powertool.
DO NOT let children come into contact with the
tool.Supervision is required when inexperienced operators use
thistool.
• Young children and the infirm.This appliance is not
intended for use by young children or infirm persons
withoutsupervision.
• This product is not intended for use by persons(including
children) suffering from diminished physical, sensory or
mental abilities; lack of experience, knowledge or skills
unless they are supervised by a person responsible for their
safety.Children should never be left alone with thisproduct.
ASSEMBLY AND ADJUSTMENTS

WARNING: To reduce the risk of serious personal
injury, turn tool off and disconnect battery pack
before making any adjustments or removing/
installing attachments or accessories.An accidental
start-up can causeinjury.

WARNING: Use only DeWALT battery packs andchargers.
Inserting and Removing the Battery Pack
from the Tool (Fig. B)
NOTE: Make sure your battery pack
3
is fullycharged.
To Install the Battery Pack into the Tool Handle
1. Align the battery pack
3
with the rails inside the tool’s
handle(Fig.B).
2. Slide it into the handle until the battery pack is firmly seated
in the tool and ensure that you hear the lock snap intoplace.
To Remove the Battery Pack from the Tool
1. Press the release button
13
and firmly pull the battery pack
out of the toolhandle.