ENGLISH
7
Fuses:
U.K. & Ireland 230V tools 3 Amperes. in plugs
EC-Declaration of Conformity
Machinery Directive
Cordless Table Saw
DCS7485
declares that these products described under
Technical Data are in compliance with:
2006/42/EC, EN62841-1:2015, EN62841-3-1:2014.
These products also comply with Directive 2014/30/EU and
2011/65/EU. For more information, please contact
at
the following address or refer to the back of themanual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of
.
Markus Rompel
Director Engineering
, Richard-Klinger-Straße 11,
D-65510, Idstein, Germany
29.07.2016
WARNING: To reduce the risk of injury, read the
instructionmanual.
Definitions: Safety Guidelines
The definitions below describe the level of severity for each
signal word. Please read the manual and pay attention to
thesesymbols.
DANGER: Indicates an imminently hazardous
situation which, if not avoided, will result in death or
seriousinjury.
WARNING: Indicates a potentially hazardous situation
which, if not avoided, could result in death or
seriousinjury.
CAUTION: Indicates a potentially hazardous situation
which, if not avoided, may result in minor or
moderateinjury.
NOTICE: Indicates a practice not related to
personal injury which, if not avoided, may result in
propertydamage.
Denotes risk of electricshock.
Denotes risk offire.
Congratulations!
You have chosen a
tool. Years of experience, thorough
product development and innovation make
one of the
most reliable partners for professional power toolusers.
Technical Data
DCS7485
Voltage V
DC
54
Type 1
Battery type Li-Ion
No load speed min
-1
5800
Blade diameter mm 210
Blade bore mm 30
Blade kerf mm 1.8
Blade body thickness mm 1.3
Riving knife thickness mm 1.6
Depth of cut at 90° mm 65
Depth of cut at 45° mm 45
Ripping capacity (Right of blade) mm 610
Ripping capacity (Left of blade) mm 318
Work surface dimensions mm 485 x 485
Overall dimensions mm 605 x 605 x 330
Weight kg 21.5
Noise values (triax vector sum) according to EN62841-1-2015:
L
PA
(emission sound pressure level) dB(A) 86
L
WA
(sound power level) dB(A) 100
K (uncertainty for the given sound level) dB(A) 3
Battery pack DCB546
Battery type Li-Ion
Voltage V
DC
18/54
Capacity Ah 6.0/2.0
Weight kg 1.05
Charger DCB118
Mains voltage V
AC
230
Battery type 18/54 Li-Ion
Approx. charging time of
battery packs
min 22 (1.3 Ah) 22 (1.5 Ah) 30 (2.0 Ah)
45 (3.0 Ah) 60 (4.0 Ah) 75 (5.0 Ah)
60 (6.0 Ah)
Weight kg 0,66
The DCB118 charger accepts 18V Li-Ion XR and XRFLEXVOLT
TM
battery packs (DCB181, DCB182, DCB183, DCB183B, DCB184,
DCB184B, DCB185 and DCB546).
Fuses:
Europe 230V tools 10 Amperes. mains
English (original instructions)
CORDLESS TABLE SAW
DCS7485
Ташев-Галвинг ООД
www.tashev-galving.com
To Next Page
Loading...
Need help?
General
