Need help?Do you have a question about the DeWalt DCW604NT and is the answer not in the manual?
General| Voltage | 18V |
|---|---|
| Plunge Stroke | 55 mm |
| Battery Type | Li-Ion |
| Power Source | Cordless |
| No Load Speed | 16000-25500 RPM |
| Collet Size | 6-8 mm |
Technical specifications for sound pressure and sound power levels, including uncertainty.
Measured vibration emission values and associated uncertainty for the tool.
Guidelines for maintaining a safe and well-lit work area to prevent accidents.
Essential safety precautions related to electrical connections and handling of power tools.
Emphasizes alertness, PPE, preventing unintentional starting, proper handling, and attire for safe tool operation.
Covers forcing the tool, switch functionality, disconnection, storage, maintenance, and tool usage guidelines.
Details on charging, usage, storage, and precautions for battery packs to prevent hazards.
Covers workpiece support, material restrictions, grip, speed, cutting area safety, and motor usage.
Instructions on bit sharpness, motor stopping, and starting procedures to ensure safe operation.
Critical warnings and advice for safe operation and maintenance of battery chargers.
Explains charge indicators, hot/cold pack delay, and troubleshooting for battery charging.
Details on avoiding hazardous environments, proper charging, storage, and contact with battery contents.
Explanation of 'Use' and 'Transport' modes for FLEXVOLT batteries and their implications for shipping regulations.
Advice on optimal storage conditions for battery packs to maintain performance and extend lifespan.
Step-by-step guide on inserting and removing the battery pack from the tool and charger.
Explanation of the fuel gauge feature on compatible battery packs to check remaining charge.
Procedures for safely installing and removing router bits from the tool, including collet usage.
Steps for centering subbases using a recommended tool for accurate alignment.
Instructions on installing template guides onto subbases for pattern routing applications.
Steps for connecting a dust extraction system to the router's fixed base attachment.
Steps for connecting a dust extraction system to the router's plunge base attachment.
Steps to properly insert the motor unit into the fixed base, ensuring correct alignment and locking.
Detailed instructions on setting and fine-tuning the cutting depth using the adjustment ring and scale.
Detailed steps for setting the plunge depth, including zeroing the scale and using turret stops for stepped cuts.
Using the knurled knob for precise, minor adjustments to the cutting depth.
Safety reminders and general guidelines to follow before and during tool use.
Guidance on correct hand placement for both fixed and plunge bases to ensure control and safety.
Instructions on how to safely turn the motor on and off, emphasizing workpiece clearing and complete stopping.
Instructions for setting up and performing cuts using the fixed base, including feed direction.
Steps for using the plunge mechanism to achieve desired cutting depths with the plunge base.
General rules and examples for correct router feed direction to ensure successful routing and avoid damage.
How to use the variable speed dial and speed selection chart to set the optimal RPM for various bits and materials.
Details on how the worklights operate and what flashing lights may indicate.
General advice on tool care and lubrication requirements for maintaining optimal performance.
Steps for cleaning the router using dry air or a damp cloth, with warnings against solvents.
Method for waxing the motor and base components to ensure smooth movement during operation.
To Next Page
