DeWalt DCW600 User Manual

DCW600
DCW604
Final page size: A5 (148mm x 210mm)

DeWalt DCW600 Specifications

General

Motor Type	Brushless
Power Source	Battery
Collet Diameter	1/4 inch
Speed Control	Variable
Speed Range	16, 000 - 25, 500 RPM
LED Light	Yes
Base Type	Fixed
Battery Type	Lithium-Ion
Battery Voltage	20V

Summary

PLUNGE ROUTER DCW600, DCW604

Technical Data

Definitions: Safety Guidelines

Explains the meaning of safety signal words like DANGER, WARNING, CAUTION, and NOTICE.

General Power Tool Safety Warnings

Work Area Safety

Guidelines for maintaining a safe and conducive work environment.

Personal Safety

Measures to ensure operator safety during tool use.

Power Tool Use and Care

Guidelines for proper operation and maintenance of power tools.

Battery Tool Use and Care

Instructions for safe handling and charging of battery packs.

Additional Specific Safety Rules for Compact Routers

Safety precautions specific to the operation of compact routers.

Chargers

Electrical Safety

Safety precautions for electrical aspects of DEWALT chargers.

Important Safety Instructions for All Battery Chargers

Essential safety guidelines for operating battery chargers.

Battery Packs

Important Safety Instructions for All Battery Packs

Essential safety guidelines for handling and using battery packs.

Assembly and Adjustments

Intended Use

Inserting and Removing the Battery Pack from the Tool (Fig. B)

Step-by-step guide for installing and removing the battery pack.

Bit Installation and Removal (Fig. D)

Instructions for installing and removing router bits.

To Remove the Bit

Procedure for safely removing a router bit from the tool.

Installing a Fixed Base Parallel Fence (Fig. G)

Installing a Plunge Base Parallel Fence with Guide Rods, DCW604 Only (Fig. H)

Attaching a Dust Extraction System to the Fixed Base (Fig. I)

Attaching a Dust Extraction System to the Plunge Base, DCW604 Only (Fig. J)

Set-Up: Fixed Base (Fig. A, K, L)

Instructions for setting up the tool with the fixed base.

Adjusting the Depth of Cut (Fig. L)

Steps for accurately setting the router's cutting depth.

Set-Up: Plunge Base, DCW604 Only (Fig. A, M)

Adjusting the Plunge Routing Depth (Fig. M)

How to adjust the plunge depth for routing operations.

Fine Adjustment of Routing Depth (Fig. M)

Operation

Instructions for Use

Proper Hand Position (Fig. N1, N2)

Correct hand placement for safe and stable tool operation.

Starting and Stopping the Motor (Fig. A)

Cutting with the Fixed Base (Fig. C)

Steps for performing cuts using the fixed base.

Cutting with the Plunge Base, DCW604 Only (Fig. A)

Instructions for making cuts with the plunge base.

Direction of Feed (Fig. O)

Choosing Router Speed (Fig. A)

Variable Speed Control (Fig. A)