Need help?Do you have a question about the DeWalt DHS780 and is the answer not in the manual?
General| Voltage | 120 V |
|---|---|
| No Load Speed | 3800 rpm |
| Mitre Capacity | 50° |
| Power Source | Corded |
| Max Cut Depth at 45 Degrees | 4.33 in |
| Amps | 15 amps |
Covers workpiece support, clamping, and proper cutting techniques to prevent accidents.
Details essential steps like planning, securing the tool, and handling jams for safe operation.
Covers tool operation, voltage, material restrictions, body positioning, and blade care.
Emphasizes using correct blades, inspection, cleaning, and proper guard usage for safety.
Essential safety guidelines for handling, charging, and storing battery packs.
Emphasizes powering off the tool before performing any assembly or adjustment tasks.
Detailed steps for safely changing the saw blade, including necessary precautions.
Procedures for installing a blade, emphasizing guard bracket return and blade replacement.
Details on adjusting mitre lock, bevel lock, overrides, and pawls for angle settings.
Steps to adjust mitre scale, pointer, and bevel square to table for accuracy.
Instructions for setting 45° and 22.5° bevel stops and related adjustments.
Covers adjusting fence, guard actuation, rail guides, and mitre lock for optimal use.
To Next Page
