DeWalt DW567 - Technical Information

Introduction
DW567 TYPE 3
End Handle Rotary Hammer
Introducing Type 3 Rotary Hammers
Product improvement to reduce speed by using 24 volt hammer gearbox
components.
Parts affected are (162) Ram, (163) O-Ring, (164) Axle and (169) Hollow
Piston.
The ram diameter is reduced from 20mm down to 19mm
Launch Details
Manufacturing Plant
Service Parts Warehouse
Launch Markets
Launch Date
Spennymoor
Perth Avenue
Global
August 2000
Technical Information
CE LPA Sound Pressure
CE LWA Acoustic Power
CE Vibration
Voltage
Ampere
Power Input
Power Output
B.P.M.
Capacity
Max. Drilling Capacity – Wood
Max. Drilling Capacity – Steel
Max. Drilling Capacity – Masonry
DB(A) 96.9
DB(A) 101.9
M/S/S 8.24
230
3.4
710 W
410 W
0-5200
26mm
30mm
13mm
26mm