Important
To assure product SAFETY and RELIABILITY, repairs,
maintenance, and adjustment should be performed by Black &
Decker (U.S.) Inc. Industrial Service Centers or other qualified
service organizations. These service organizations service DeWALT
tools always using D
EWALT replacement parts. Black & Decker
(U.S.) Inc. industrial tool service centers are certified for servicing
D
EWALT industrial tools.
Accessories
Recommended accessories for use with your tool are available at
extra cost from your local dealer or service center.
If you need assistance in locating any accessory, please contact
DeWALT Industrial Tool Company, P.O. Box 158, 626 Hanover Pike,
Hampstead, MD 21074 or call 1-800-4-D
EWALT (1-800-433-9258).
Double Insulation
DOUBLE-INSULATED tools are constructed throughout with TWO
separate “layers” of electrical insulation or one DOUBLE thickness
of insulation between you and the tool’s electrical system.
Tools built with this insulation system are not intended to be
grounded. As a result, your tool is equipped with a two-prong plug
which permits you to use extension cords without concern for
maintaining a ground connection. See page 15 for more extension
cord information.
NOTE: DOUBLE-INSULATION does not take the place of normal
safety precautions when operating this tool. The insulation system
is for added protection against injury resulting from a possible
electrical insulation failure within the tool.
CAUTION: When servicing all tools, USE IDENTICAL REPLACE-
MENT PARTS. Repair or replace damaged cords.
14
FIG 31
FIG 32
LAYOUT
LINE
To Next Page
Loading...
