DeWalt DW712N - Page 25

ENGLISH
23
MITRE SAW DW712, DW712N
Congratulations!
You have chosen a DEWALT tool. Years of experience, thorough
product development and innovation make DEWALT one of the most
reliable partners for professional power tool users.
Technical Data
DW712 DW712N
Sound pressure (L
pA
) dB(A) 90 90
Acoustic power (L
WA
) dB(A) 103 103
Hand/arm weighted vibration m/s
2
< 2.5 < 2.5
Voltage V 230 230
(UK & Ireland only) V 230/115 230/115
Power output W 1600 1600
Current input (230V) A 8 8
Current input (115V) A 16 16
Blade diameter mm 216 216
Blade bore mm 30 30
Max. blade thickness mm 1.8 1.8
Blade speed min-
1
3,500–4,600 5,400
Max. crosscut capacity at 90˚ mm 300 300
Max. mitre cut capacity at 45˚ mm 212 212
Max. depth of cut 90˚ mm 70 70
Max. depth of bevel cross-cut 45˚ mm 50 50
Mitre (max. positions)
left 50˚ 50˚
right 60˚ 60˚
Bevel (max. positions)
left 48˚ 48˚
right 2˚ 2˚
0° mitre
Resulting width at max. height 70 mm mm 300 300
Resulting height at max. width 300 mm mm 70 70
45° mitre left
Resulting width at max. height 70 mm mm 212 212
Resulting height at max. width 212 mm mm 70 70
45° mitre right
Resulting width at max. height 70 mm mm 212 212
Resulting height at max. width 212 mm mm 70 70
45° bevel left
Resulting width at max. height 50 mm mm 300 300
Resulting height at max. width 300 mm mm 50 50
31.62° mitre, 33.85° bevel
Resulting height at max. width 254 mm mm 65 65
Blade stopping time s < 10 < 10
Dust collection efficiency mg/m < 2.0 < 2.0
Weight kg 19.0 19.0
Fuses
Europe 230 V tools 10 Amperes, mains
U.K. & Ireland 230 V tools 13 Amperes, in plugs
The following symbols are used throughout this manual:
Denotes risk of personal injury, loss of life or damage to the
tool in case of non-observance of the instructions in this
manual.
Denotes risk of electric shock.
EC-Declaration of conformity
DW712/DW712N
DEWALT declares that these products described under “technical data”
have been designed in compliance with:
98/37/EEC, 89/336/EEC, EN 55014-2, EN 55014, EN 61000-3-2,
EN 61000-3-3 & EN 61029.
For more information, please contact DEWALT at the following address
or refer to the back of the manual.
The undersigned is responsible for compilation of the technical file and
makes this declaration on behalf of DEWALT.
TUV Rheinland
Product and Safety GmbH (TRPS)
Am Grauen Stin 1
D-51105 Köln
Germany
Horst Grossmann
Vice President Engineering and Product Development
DEWALT, Richard-Klinger-Straße 40,
D-65510, Idstein, Germany