RADIAL ARM SAW DW721
Congratulations!
You have chosen a DEWALT product. Years of experience, thorough
product development and innovation make DEWALT one of the most
reliable partners for professional users.
Table of contents
Technical data en - 1
EC-Declaration of conformity en - 1
Safety instructions en - 2
Package contents en - 3
Description en - 3
Electrical safety en - 3
Mains plug replacement (U.K. & Ireland only) en - 3
Using an extension cable en - 4
Assembly and adjustment en - 4
Instructions for use en - 6
Optional accessoires en - 7
Maintenance en - 9
Guarantee en - 9
Quick reference chart en - 10
Technical data
DW721
Motor power (input) W 2000
Motor power (output) W 1500
Voltage V 230
Blade diameter min/max mm 270-300
Blade bore mm 30
Spindle diameter mm 20
No load speed, 50 Hz min
-1
2800
No load speed, 60 Hz min
-1
3400
Depth of cut at 90° mm 90
Depth of cut at 45° mm 60
Max. crosscut capacity at 0°
in 25 mm stock mm 610
Max. mitre cut capacity at 45° righthand mm 405
in 25 mm stock lefthand mm 425
Max. crosscut width mm 610
Max. rip cut width mm 870
Overall dimensions (with legstand) mm 148 x 95 x 150
Dust extraction adapter mm 100
Weight kg 112.0
Standard equipment:
Legstand, TCT blade, blade guard and tools, no-volt release switch.
Fuses:
Europe 230 V tools 10 Amperes, mains
UK & Ireland 13 Amperes, in plug
The following symbols are used throughout this manual:
Denotes risk of personal injury, loss of life or damage to the
tool in case of non-observance of the instructions in this
manual.
Denotes risk of electric shock.
Sharp edges.
EC-Declaration of conformity
DW721
D
EWALT declares that these Power Tools have been designed in
compliance with: 89/392/EEC, 89/336/EEC, 73/23/EEC, EN 61029,
EN 55104, EN 55014, EN 61000-3-2 & EN 61000-3-3.
For more information, please contact DEWALT at the address below or
refer to the back of the manual.
Level of sound pressure according to 86/188/EEC & 89/392/EEC,
measured according to DIN 45635:
DW721
L
pA
(sound pressure) dB(A)* 84.2
L
WA
(acoustic power) dB(A) 91.4
* at the operator’s ear
Take appropriate measures for the protection of hearing if the
sound pressure of 85 dB(A) is exceeded.
Weighted root mean square acceleration value according to DIN 45675:
DW721
< 2.5 m/s
2
TÜV Rheinland
Sicherheit und Umweltschutz GmbH
Am Grauen Stein
D-51105 Köln
Germany
Cert. No.
BM 9511442 01
Director Engineering and Product Development
Horst Großmann
DEWALT, Richard-Klinger-Straße 40,
D-65510, Idstein, Germany
en - 1 22
ENGLISH
To Next Page
Loading...
