DeWalt DW728 - Page 27

ENGLISH
RADIAL ARM SAW DW728/DW729
Congratulations!
You have chosen a DEWALT product. Years of experience, thorough
product development and innovation make DEWALT one of the most
reliable partners for professional users.
Table of contents
Technical data en - 1
EC-Declaration of conformity en - 1
Safety instructions en - 2
Package contents en - 3
Description en - 3
Electrical safety en - 3
Mains plug replacement (U.K. & Ireland only) en - 3
Using an extension cable en - 3
Assembly and adjustment en - 4
Instructions for use en - 6
Optional accessoires en - 7
Maintenance en - 8
Guarantee en - 8
Quick reference chart en - 9
Technical data
DW728 DW729
Motor power (input) W 2200 4000
Motor power (output) W 1840 3000
Voltage V 230 415
Blade diameter max mm 350 350
Blade bore mm 30 30
Spindle diameter mm 30 30
No load speed, 50 Hz min
-1
2800 2800
No load speed, 60 Hz min
-1
3400 3400
Depth of cut at 90° mm 110 110
Depth of cut at 45° mm 75 75
Max. crosscut capacity at 0°
in 25 mm stock mm 610 610
Max. mitre cut capacity at 45°
in 25 mm stock mm 445 445
at max. cutting depth mm 380 380
Max. crosscut width mm 610 610
Max. rip cut width mm 920 920
Overall dimensions (with legstand) mm 148 x 95 x 150 148 x 95 x 150
Dust extraction adapter mm 100 100
Weight kg 149 149
Standard equipment:
Legstand, TCT blade, blade guard and tools, no-volt release switch.
Fuses:
Europe 230 V tools 16 Amperes, mains
415 V tools 16 Amperes, per phase
UK & Ireland 16 Amperes, in plug
The following symbols are used throughout this manual:
Denotes risk of personal injury, loss of life or damage to the
tool in case of non-observance of the instructions in this
manual.
Denotes risk of electric shock.
Sharp edges.
EC-Declaration of conformity
DW728
DEWALT declares that these power pools have been designed in
compliance with: 98/37/EEC, 89/336/EEC, 73/23/EEC, EN 61029,
EN 55014-2, EN 55014, EN 61000-3-2 & EN 61000-3-11.
DW729
DEWALT declares that these Power Tools have been designed in
compliance with: 98/37/EEC, 89/336/EEC, 73/23/EEC, EN 61029,
EN 55014-2, EN 55014, EN 61000-3-2 & EN 61000-3-3.
For more information, please contact DEWALT at the address below or
refer to the back of the manual.
Level of sound pressure according to 86/188/EEC & 89/392/EEC,
measured according to DIN 45635:
DW728 DW729
L
pA
(sound pressure) dB(A)* 85.5 85.5
L
WA
(acoustic power) dB(A) 93.5 93.5
* at the operator’s ear
Take appropriate measures for the protection of hearing if the
sound pressure of 85 dB(A) is exceeded.
Weighted root mean square acceleration value according to DIN 45675:
DW728 DW729
< 2.5 m/s
2
< 2.5 m/s
2
TÜV Rheinland
Sicherheit und Umweltschutz GmbH
Am Grauen Stein
D-51105 Köln
Germany
Cert. No.
BM 9511442 01
Director Engineering and Product Development
Horst Großmann
DEWALT, Richard-Klinger-Straße 40,
D-65510, Idstein, Germany
20 en - 1