ENGLISH
28
RADIAL ARM SAW
DW728KN/DW729KN
Congratulations!
You have chosen a DEWALT power tool. Years of experience, thorough
product development and innovation make D
EWALT one of the most
reliable partners for professional power tool users.
Technical Data
DW728KN DW729KN
Power input W 2200 4000
Power output W 1820 3300
Type 1 1
Voltage V 230 400
Blade diameter mm 350 350
Blade bore mm 30 30
Spindle diameter mm 30 30
No-load speed, 50 Hz min
-1
3000 3000
Load speed, 50 Hz min
-1
2850 2780
Depth of cut at 90° mm 110 110
Max. crosscut capacity at 0° mm 525 525
Max. mitre cut capacity at 45°
right hand mm 365 365
left hand mm 150 150
Depth of cut at 45° mm 75 75
Max. crosscut capacity at 0° mm 525 525
Max. mitre cut capacity at 45°
right hand mm 250 250
left hand mm 270 270
Overall dimensions
(with legstand) cm 181 X 134 X 152 181 X 134 X 152
Dust extraction adapter mm 100 100
Recommended dust extraction values
Air velocity at the point
of connection m/s 20 20
Volume metric flow m³/h 500 500
Vacuum value at the point
of connection PA 5000/2400 5000/2400
Dust extraction port mm 100 100
Cross area section cm
2
78.5 78.5
Dust extraction port mm 40 40
Cross area section cm
2
12.6 12.6
Weight kg 149 149
Automatic blade brake time <10s <10s
Duty cycle min 1'/1' 1'/3'
Protection grade IP5X IP5X
Vibration total values (triax vector sum) determined according to EN 61029-1:
L
PA
(sound pressure) dB(A) 96 96
K
PA
(sound pressure
uncertainty)
dB(A) 3.0 3.0
L
WA
( sound power)
dB(A) 109 109
K
WA
(sound power
uncertainty)
dB(A) 2.9 2.9
Vibration total values (triax vector sum) determined according to EN 61029-1:
Vibration emission value a
h
=
m/s
3
2.0 2.0
Uncertainty K =
m/s
3
1.9 1.9
NOTE: The figures are emission levels and are not necessarily safe
working levels. Whilst there is a correlation between the emission and
exposure levels, this cannot be used reliably to determine whether or
not further precautions are required. Factors that influence the actual
level of exposure of the workforce include the characteristics of the
workroom and the other sources of noise, etc. i.e. the number of
machines and other adjacent processes. Also, the permissible exposure
level can vary from country to country. This information, however, will
enable the user of the machine to make a better evaluation of the
hazard and risk.
Fuses:
Europe 230 V tools 16 Amperes, mains
400 V tools 16 Amperes, per phase
Defi nitions: Safety Guidelines
The definitions below describe the level of the severity for each signal
word. Please read the manual and pay attention to these symbols.
DANGER: indicates an imminently hazardous situation
which, if not avoided, will result in death or serious
injury.
WARNING: indicates a potentially hazardous situation
which, if not avoided, could result in death or serious
injury.
CAUTION: indicates a potentially hazardous situation
which, if not avoided, may result in minor or moderate
injury.
NOTICE: Indicates a practice not related to personal
injury which, if not avoided, may result in property
damage.
Denotes risk of electric shock.
Denotes risk of fire.
Denotes sharp edges.
EC-Declaration of Conformity
MACHINERY DIRECTIVE
DW728KN/DW729KN
D
EWALT declares that these products, described under "technical data"
are in compliance with:
2006/42/EC, EN 1870-17:2007.
These products also comply with Directive 2004/108/EC. For more
information, please contact D
EWALT at the address or refer to the back
of the manual.
The undersigned is responsible for compilation of the technical file and
makes this declaration on behalf of D
EWALT
Horst Grossmann
Vice President Engineering and Product Development
D
EWALT, Richard-Klinger-Straße 11,
D-65510, Idstein, Germany
15.06.2009
To Next Page
Loading...
