DeWalt DW744 - Technical Data; Ec Declaration of Conformity

20
ENGLISH
Congratulations!
You have chosen a D E WALT tool. Years of experience, thorough product
development and innovation make D E WALT one of the most reliable
partners for professional power tool users.
Technical data
DW744 DW744XP
Voltage V 115 230
Motor power (input) W 1,500 2,000
Motor power (output) W 850 1,300
No-load speed min
-1
3,650 3,000
Blade diameter mm 250 250
Blade bore mm 30 30
Blade body thickness mm 2.2 2.2
Riving knife thickness mm 2.3 2.3
Depth of cut at 90° mm 77 77
Depth of cut at 45° mm 57 57
Ripping capacity mm 625 625
Overall dimensions mm 740 x 680 x 465 740 x 680 x 465
Weight kg 29 29
Fuses:
Europe 230 V tools 10 Amperes, mains
U.K. & Ireland 230 V tools 13 Amperes, in plugs
U.K. & Ireland 115 V tools 16 Amperes, mains
The following symbols are used throughout this manual:
WARNING: Denotes risk of personal injury, loss of life or
damage to the tool in case of non-observance of the
instructions in this manual.
Denotes risk of electric shock.
Sharp edges.
EC-Declaration of conformity
DW744/DW744XP
D E WALT declares that these power tools have been designed in
compliance with: 98/37/EC, 89/336/EEC, 73/23/EEC, 86/188/EEC,
EN 55014-1, EN 55014-2, EN 61029-1, EN 61029-2-1, EN 61000-3-2 &
EN 61000-3-3.
For more information, please contact D E WALT at the address below,
or refer to the back of the manual.
Level of sound pressure:
DW744 DW744XP
L
pA
(sound pressure) dB(A) 93 81
K
pA
(measurement uncertainty) dB(A) 3 2,2
L
WA
(acoustic power) dB(A) 106 102
L
WA
(guaranteed) dB(A) 110 110
K
WA
(measurement uncertainty) dB(A) 3 2,2
Director Engineering and Product Development
Horst Großmann
D E WALT, Richard-Klinger-Straße 11
D-65510, Idstein, Germany
TABLE SAW
DW744/DW744XP