ENGLISH
3
BENCH GRINDER
DW752R
Congratulations!
You have chosen a DeWALT tool. Years of
experience, thorough product development and
innovation make DeWALT one of the most reliable
partners for professional power tool users.
Technical Data
DW752R-TR
Voltage V 230
Power input W 373
Frequency Hz 50
No-load speed /min 2950
Wheel diameter mm 150
Wheel thickness mm 15-17
Bore diameter mm 12.7-12.9
Grinder wheel speed m/s 35
Weight kg 11
L
PA
(sound pressure)
dB(A)
58
K
PA
(sound pressure
uncertainty)
dB(A)
3
L
WA
(sound power)
dB(A)
71.5
K
WA
(sound power
uncertainty)
dB(A)
3
Definitions: Safety Guidelines The
definitions below describe the level of severity for
each signal word. Please read the manual and pay
attention to these symbols.
DANGER: Indicates an imminently
hazardous situation which, if not avoided,
will result in death or serious injury.
WARNING: Indicates a potentially
hazardous situation which, if not
avoided, could result in death or
serious injury.
CAUTION: Indicates a potentially
hazardous situation which, if not
avoided, may result in minor or
moderate injury.
NOTICE: Indicates a practice not
related to personal injury which, if
not avoided, may result in property
damage.
Denotes risk of electric shock.
Denotes risk of fire.
EC-Declaration of Conformity
MACHINERY DIRECTIVE
DW752R
DeWALT declares that these products described
under “technical data” are in compliance with:
2006/42/EC, EN 61029-1, EN61029-2-4.
These products also comply with Directive
2004/108/EC, 2011/65/EU. For more information,
please contact DeWALT at the following address or
refer to the back of the manual.
The undersigned is responsible for compilation of the
technical file and makes this declaration on behalf of
DeWALT.
Horst Grossmann
Vice President Engineering and Product
Development
DeWALT, Richard-Klinger-Straße 11,
D-65510, Idstein, Germany
06.06.2013
WARNING: To reduce the risk of injury,
read the instruction manual.
General Power Tool Safety Warnings
WARNING! Read all safety warnings
and all instructions. Failure to follow
the warnings and instructions may result
in electric shock, fire and/or serious
injury.
SAVE ALL WARNINGS AND INSTRUCTIONS
FOR FUTURE REFERENCE
The term “power tool” in the warnings refers to your
mains-operated (corded) power tool or battery-
operated (cordless) power tool.